Elpress DV1300C2 C-Fork Crimping Head (Cu 10-400mm²)

Product overview

Elpress DV1300C2 C-Fork Crimping Head is a tested and certified crimping head with patented DUAL technology for contact crimping Cu terminals (type KR/KRF/KS/KSF 10-300 mm²). Used in conjunction with Elpress Foot Pump P4000 or Battery/ Mains Powered Pump PS710. Approved by Network Rail (PADS Certificate PA05/07403).

EAN Code: 7393487059726

A new Table Stand that can be used with crimp head DV1300C2 has been designed for operators with high frequency use of the C2 crimp head: Elpress TS1300 Table Stand for Crimping Heads. With the table stand you get a stable, safe and easy use of the C2 head.

This product replaced Elpress DV1300C Crimping Head C-fork type (10-300mm²).

Elpress DV1300C2 Features

DV1300C2 C-Fork Crimping head with patented DUAL technology that gives optimised hexagonal crimping + a certain amount of indented crimping in two integrated steps

Working pressure 63 MPa (630 bar)

Crimp force 130 kN (13 tonnes)

DUAL 10-300mm²

You can use other accessories (without the DUAL function) for crimping both Cu and Al terminals

No Die Holders are necessary when using DUAL Dies

Net Weight: 4.9 kg

Dimensions: 297 x 140 x 75 mm

DUAL SYSTEM

DUAL Contact crimping takes place in two stages. First, a hexagonal crimping that provides optimal symmetrical contact with the conductor. This means that no wires are broken or come apart in the edge facing the connector. Indent crimping follows that and provides 30% better electrical properties.

Patented crimping

For crimping of flexible Cu conductors according to IEC 60228, type class 5

Used with Elpress KRF/KSF terminals

For extra harsh environments such as cars and trains, where the terminals are exposed to electrical properties as well as to corrosion, mechanical durability and vibrations

Meets IEC/EN 61238:1

Meets corrosion requirements according to DIN V 40 046-37

Meets the requirements for vibration according to EN 50 155

Meets the requirements of mechanical strength according to SEN 24 50 10

Other Systems for Crimping Cu Terminals

CU TERMINALS

The V1300 System is suitable for crimping Cu Terminals 10-400mm2. An open-head C version is also available for better access in confined spaces.

The V250 System is suitable for crimping Cu Terminals 10-800mm2.

For more information on Elpress DV1300C2 C-Fork Crimping Head, consult PDF File or Technical Data Table below.

*Technical Data subject to change without notice.

FREE Technical Advisory Service

E-Tech Components UK Ltd maintains a free technical advisory service.

Contact us for enquiries concerning this and all other products: +44 (0) 1744 762 929