Home>Cable Accessories>Cable Joints>Low Voltage Cable Joints
Prysmian BICON MPJEM-U Industrial Cable Joints (600/ 1000V) are straight joints for LV cables, suitable for use with un-armoured cables with polymeric insulation and copper conductors from with copper conductors from 1.5mm² to 300mm².
Part Numbers: MPJEMJ1U, MPJEMJ2U, MPJEMJ3U, MPJEMJ4U, MPJEMJ5U, MPJEMJ6U, MPJEMJ7U, MPJEMJ8U
Tested and approved to BS EN 50393 and ENATS TS C81/3.
Utilises Prysmian’s Low hazard isocyanate free JEM resin.
Utilises Compact joints shells which minimises the joint footprint.
Requires compression connectors (sold separately).
For many years, BICON has been in the forefront of jointing technology, from designs using bituminous filling compounds, to the development of the highly successful BICAST acrylic resin joint system.
Most recently, we have supplemented these ranges with heat shrink and pre-moulded products (BIMOLD). We can now offer a unique package to satisfy all requirements.
All four systems are available at voltages up to or above 33 kV and, depending on application, each may offer benefits over the others.
For instance, termination of high voltage polymeric cables requiring the facility to disconnect or add in additional cables at a later stage, means that BIMOLD is the logical choice. Likewise, BICAST provides a fast, comprehensive joint method with a versatile range covering low and high voltage and all cable types.
Download the PDF file for Technical Data on Prysmian BICON MPJEM-U Industrial Cable Joints (LV).
*Technical Data subject to change without notice. MPJEMJ1U, MPJEMJ3U, MPJEMJ5U
FREE Technical Advisory Service
E-Tech Components UK Ltd maintains a free technical advisory service.
Contact us for enquiries concerning this and all other products: +44 (0) 1744 762 929
| JOINT SELECTION | |
|---|---|
| Nominal Conductor Cross Section | Two Core |
| Nominal Conductor Cross Section1.5 mm2 | Two CoreMPJEMJ1U |
| Nominal Conductor Cross Section2.5 mm2 | Two CoreMPJEMJ1U |
| Nominal Conductor Cross Section4 mm2 | Two CoreMPJEMJ1U |
| Nominal Conductor Cross Section6 mm2 | Two CoreMPJEMJ1U |
| Nominal Conductor Cross Section10 mm2 | Two CoreMPJEMJ2U |
| Nominal Conductor Cross Section16 mm2 | Two CoreMPJEMJ2U |
| Nominal Conductor Cross Section25 mm2 | Two CoreMPJEMJ3U |
| Nominal Conductor Cross Section35 mm2 | Two CoreMPJEMJ3U |
| Nominal Conductor Cross Section50 mm2 | Two CoreMPJEMJ4U |
| Nominal Conductor Cross Section70 mm2 | Two CoreMPJEMJ4U |
| Nominal Conductor Cross Section95 mm2 | Two CoreMPJEMJ4U |
| Nominal Conductor Cross Section120 mm2 | Two CoreMPJEMJ5U |
| Nominal Conductor Cross Section150 mm2 | Two CoreMPJEMJ5U |
| Nominal Conductor Cross Section185 mm2 | Two CoreMPJEMJ5U |
| Nominal Conductor Cross Section240 mm2 | Two CoreMPJEMJ6U |
| Nominal Conductor Cross Section300 mm2 | Two CoreMPJEMJ6U |
| Nominal Conductor Cross Section*400 mm2 | Two CoreMPJEMJ8U |
| SHELL DIMENSIONS | |
| Joint Reference | Min Box Entry ØA (mm) |
| Joint ReferenceMPJEMJ1U | Min Box Entry ØA (mm)12 |
| Joint ReferenceMPJEMJ2U | Min Box Entry ØA (mm)14 |
| Joint ReferenceMPJEMJ3U | Min Box Entry ØA (mm)23 |
| Joint ReferenceMPJEMJ4U | Min Box Entry ØA (mm)28 |
| Joint ReferenceMPJEMJ5U | Min Box Entry ØA (mm)32 |
| Joint ReferenceMPJEMJ6U | Min Box Entry ØA (mm)45 |
| Joint ReferenceMPJEMJ7U | Min Box Entry ØA (mm)40 |
| Joint ReferenceMPJEMJ8U | Min Box Entry ØA (mm)57 |
