CCG E1EX-VS VX VORTEx Barrier Cable Gland (0573)

Product overview

CCG E1EX-VS VX VORTEx Barrier Cable Gland (0573)

CCG E1EX-VS VX VORTEx Barrier Cable Gland (0573) is a Hazardous Area Glanding Device for Unfilled Steel Wire Armour, Copper Tape or Lead Sheathed Cable. Suitable for indoors, outdoors, Group II, III, Zone 1, 2, 20, 21 and 22 hazardous areas.

CCG Part Numbers: 057300-16-VX, 057300S-VX, 057300-VX, 0573-0S-VX, 057301-VX, 057322-VX, 057302-VX, 057333-VX, 057303-VX, 057344-VX, 057304-VX, 057355-VX, 057305-VX, 057366-VX, 057306-VX, 057377-VX, 057307-VX, 057308-VX, 057399-VX, 057309-VX, 057310-VX, 057311-VX, 057312-VX, 057313-VX

Features & Benefits

For indoors, outdoors, Group II, III, Zone 1, 2, 20, 21 and 22 hazardous areas.

For unfilled hygroscopic multicore cables, refer to IEC 60079-14; 9.3.2 and 10.6.2a, IEC 61892-7, 10.6 and 10.7.

Two part handling, no loose parts. Freely rotating captive cone and inspectable cone ring provides an armour clamp and earth bond on steel wire armour and aluminium armour.

With a patented Variable Deluge Seal™ as standard. Provides 360° earthing to copper tape.

Instantly mixed and injected resin forms a 100% barrier around the individual cores of the cable.

Prevents explosive gases and/or liquids transmitting down the cable.

Precision manufactured from high-quality brass (Marine Grade Electroless Nickel Plated™) available in stainless steel 316/316L on request.

Supplied with a thread sealing gasket (parallel threads only).

CCG E1EX-VS VX Technical Data

Type: E1EX-VS VX (VORTEx)

Equipment Protection Levels: Ex db IIC, Ex eb IIC, Ex ta IIIC, Ex nR IIC

Gland Material: Brass (Marine Grade Electroless Nickel Plated™), Stainless Steel 316/316L

Seal Material: Standard Thermoset Elastomer or Extreme Temperature Seals, Quick setting Barrier Resin

Sealing Gasket Material: HDPE, Nylon 66 or PTFE

Cable Type: Steel Wire Armour, Copper Tape used for VSD (Variable Speed Drives) or Lead Sheathed

Armour Clamping: Rotating Captive Cone and Inspectable Cone Ring

Sealing Area: Outer Sheath, Variable Deluge Seal™ and VORTEx Resin around Cable Conductors

Optional Accessories: Adaptor, Reducer, Earth Tag, Locknut, Serrated Washer and Shroud

Note: The installer should ensure that the materials are suitable for the installation environment.

Installation Standards

IEC/BS EN

IECEx

ATEX

UKEX

INMETRO (Brazil)

TR CU (Russia)

CCC/CNEx (China)

SANS

Ingress Protection

Deluge Protection

Corrosion Protection

Marine ABS

DNV-GL

EMC Compatible

Hazardous Areas

A Hazardous Area is one in which there is potential for an explosion of gases, vapours, mists or dust or a combination of these. Such locations are petrochemical plants, offshore oil rigs, fuel filling stations, timber mills, coal mines, flour mills, paint spray booths, sewerage treatment plants, hospitals, explosive magazines and more.

Special precautions must be taken for the design, manufacture, installation and use of equipment and cable glands in such hazardous areas. Persons involved in selecting installing and maintaining electrical equipment for use in hazardous areas should be competently trained, have a full understanding of what a hazardous area is and have knowledge of the equipment protection levels and the installation standards involved.

Additional Technical Data on CCG E1EX-VS VX VORTEx Barrier Cable Gland (0573) Part Numbers can be found on the table below. For Conforming Standards & Certificates as well as Fitting Instructions, please advise PDF File.

FREE Technical Advisory Service

E-Tech Components UK Ltd maintains a free technical advisory service.

Contact us for enquiries concerning this and all other products: +44 (0) 1744 762 929