Elpress PVX611 Battery Crimping Tool (Cu 10-240mm², Al 16-35mm², C-sleeves 6-50mm²)

Product overview

Elpress PVX611 and PVX611DB Battery Crimping Tools are tested and certified battery-powered crimping tools for crimping Cu Terminals KR/KS 10mm², KRF/KSF 16-150mm², KRD/ KSD 16-185mm², KRT/ KST 10-240mm², Al Terminals 16-25mm² (-35 solid), C-sleeves 6/6-50/50 mm², DIN 46235 10-95mm². Uses the same dies as T2600, V600 and V611. Approved by Network Rail (PADS Certificate PA05/07403).

EAN code: 7393487061262

Elpress PVX611 Battery Crimping Tool is an ergonomic crimping tool with a 2 year warranty, with a focus on higher safety security and better durability. It is the latest tool in the Elpress 600 series. The tool is 100% reverse compatible and tested and approved for use together with Elpress TB-dies and KB-dies. One new feature of the pistol is a display that gives you valuable information about your tool, e.g. number of performed crimps, battery status, service intervals, etc.

The PVX611 Battery Crimping Tool has been created with a new ergonomic design that offers you, the user, enhanced performance. Supplied with a 2-year guarantee*. There is also the possibility to set a “safety start” on the tool (adjustable crimping operation start with optional one or two ‘click’ trigger for safer handling of the tool).

PVX611DB, supplied with 2 batteries (EAN code: 7393487061279).

PVX611-WOBC, supplied without battery/ charger.

PVX611-US, supplied with 115 VAC charger.

This product has replaced Elpress PVL611 Crimping Tool (6-240mm²).

Elpress PVX611/ PVX611DB Features

Better protection against dirt and dust ingress through tool chassis

Ergonomic design that optimizes the balance of the tool in the users hand

Press fork opened by rotary action

Crimp pressure control by electronic pressure monitoring

Single handed grip for easy operation

LED lighting for easier work

”Quick boost” for more efficient pressing

Digital display with information about the tool and service interval

Tested together with Elpress TB-dies and KB22/ KB25-dies (Network Rail-approved according to PADS Certificate PA05/07403)

Pressure monitoring information via display when at correct pressure / full pressure not achieved (warning light (LED) and signal)

230 VAC battery charger Li-Ion Makita, charging time 15 min

LED indication of charge status

For service and installation use

Supplied with robust plastic case, battery, charger and instruction manual

Νet Weight: 5.5 kg

Dimensions: 414 x 116 x 75 mm

General Information

SYSTEM ELPRESS

System Elpress consists of terminals and tools, designed and tested together to give a certified crimping result. This ensures that users will feel confident when using our systems. It also ensures the achievement of a secure connection through the proper handling of our products.

HYDRAULIC CRIMP SYSTEMS

Elpress hydraulic crimp systems crimp from 10 to 1200 mm². The systems consist of pumps and crimp heads that can be freely combined or with complete hand-held tools, where these devices are integrated. Wide range of accessories available for crimping, pre-rounding, cutting etc. Together with the matching terminals, they form  a complete system. Both pumps and hand-held tools have, with a few exceptions, quick feed function that means crimping can begin after a few pump strokes. The systems have a built-in ratchet lock that ensures the completion of the initial crimp and thus, produces results with the best characteristics. Pumps can connect to the different crimp heads providing the option of comfortable work in difficult situations and with maximum flexibility.

Systems for Crimping Cu & Al Terminals

CU TERMINALS

The V1300 System is suitable for crimping Cu Terminals 10-400mm2. An open-head C version is also available for better access in confined spaces.

The V250 System is suitable for crimping Cu Terminals 10-800mm2.

AL TERMINALS

The V1300 System is suitable for the indent crimping of Al Terminals and pre-rounding of Al Conductors 16-240mm2. Round crimping is carried out on sector-shaped Al Conductors.

The V250 System is suitable for indent crimping Al Terminals and pre-rounding Al Conductors 16-630mm2. Round crimping is carried out on sector-shaped Al Conductors.

For more information on Elpress PVX611/ PVX611DB Battery Crimping Tool (Cu 10-240mm², Al 16-35mm²), consult PDF File or Technical Data Table below.

*Technical Data subject to change without notice.S

FREE Technical Advisory Service

E-Tech Components UK Ltd maintains a free technical advisory service.

Contact us for enquiries concerning this and all other products: +44 (0) 1744 762 929