Cable Accessories
Nexans 3CK-HSS Heat-Shrink Trifurcating Breakout Kit range of un-screened kits are suitable for converting three-core polymeric insulated MV cables (XLPE and EPR) into single-core formation. Provides moisture and abrasion resistance to the insulated cores. Generally used in conjunction with fully screened MV Separable Connectors, e.g. Euromold, Pfisterer MV-CONNEX and more.
Part Numbers: 3CK-HSS-1, 3CK-HSS-2, 3CK-HSS-3.
Manufactured from cross-linked self-extinguishing polymeric insulating material, UV and thermally resistant and internally coated with a hot melt adhesive. Each breakout kit consists of an anti-tracking heat shrink three-core breakout, 3 x 500mm long anti-tracking tubes, sealing mastic and installation instructions. Longer tail lengths or extension sleeving are also available.
For environmental protection of the exposed cores and crutch of 3 and 4 core polymeric insulated cables when terminated with Nexans screened separable connectors. Suitable for use on medium voltage cables up to 36kV (where the cable screening is grounded within the used separable connector). These anti-tracking heatshrink unscreened trifurcating kits are equally suitable as additional insulation when installing unscreened three-core 3.3kV cables.
When used as a MV trifurcating kit, install with care and adhere to the installation instructions of the separable connectors. Additional materials may be necessary for armour (SWA or AWA) earthing.
The kit consists of: 1 x Heat-shrink Anti-tracking Breakout, 3 x 500 mm Anti-tracking core tubes, 1 x sealing mastic and installation instructions.
The breakout kits are dependant on cable requirements. When ordering please give diameter of core insulation, overall diameter of cable and number of cores (for 4 core cables please state whether all core insulations are the same diameter). If these are unknown please give kV rating, core size in sq mm, number of cores and whether armoured/ unarmoured. For relevant solderless earth kits for copper tape screened cables please refer to the appropriate section in the catalogue.
Please note these are not termination kits and installer should use relevant cable terminations in conjunction with these kits.
Additional Technical Data of Nexans 3CK-HSS Heat-Shrink Trifurcating Breakout Kits (3CK-HSS-1, 3CK-HSS-2, 3CK-HSS-3) can be found on the table below. For more information, please advise PDF File. Nexans 17JTS1 W
MGA Trading, Dammam, maintains a technical advisory service.
Contact us: +966 13 882 1111 / +966 13 831 1116
| Order Ref. | Insulation Diameter Range |
|---|---|
| Order Ref.3CK-HSS-1 | Insulation Diameter Range14-26 |
| Order Ref.3CK-HSS-2 | Insulation Diameter Range20-42 |
| Order Ref.3CK-HSS-3 | Insulation Diameter Range28-52 |