Home>Cable Management & Protection>Cable Cleats & Clamps>Single Way Cable Cleats
Prysmian BICON Single Way Polyamide Cleat 373AA Series are two bolt single way cleats 15 to 170 mm for the mounting of single and multicore cables. They can be used with low, medium and high voltage cables with diameters between Ø 15 mm – 170 mm or tubes and hoses.
Part Numbers: 373AA00, 373AA01, 373AA02, 373AA03, 373AA04, 373AA05, 373AA06.
Prysmian BICON 373AA Series Features
Manufactured from high-strength glass-filled polyamide 6 (PA), glass fibre reinforced
Suitable for single or multicore cables with diameters from 15 – 170mm
For mounting low, medium and high voltage cables
High range take – able to accommodate loosely toleranced cables
Non magnetic / non conductive.
Non oxidizing / non corrosive.
No sharp angles.
Stackable
Life expectancy 40+ years
Halogen free, flame retardant and self-extinguising – ideal for tunnels and buildings V-0 (UL94)
Weather resistant – UV, Ozone and frost
Resistant to oils, salts, moisture, acids, other aggressive materials and even nuclear radiation.
Resistant to Ionizing radiation – ideal for use in nuclear power plants
Fully recyclable
Available pre-mounted
Approved to IEC 61914:2009
Tailor-made fastening material is also available.
Operation Temperatures -40°C to +125°C (with short periods at +225°C)
Prysmian BICON 373AA Series cable clamps (cable cleats) have been tested by UL (the underwriters laboratories U.S.A.), Voltalab in Grenoble (Schneider), the Prof. Ir. Damstra laboratory (Eaton) and SGS Brussels amongst other in accordance with international safety standard NEN-EN-IEC 61914:2009. (All test reports are available upon request).
Cable and Cleat Selection
Design Number Cable Diameter ∅ (mm) Cable Diameter ∅ (inch)
373AA00 15 – 26 mm 0.59 – 1.02 in.
373AA01 26 – 38 mm 1.02 – 1.5 in.
373AA02 36 – 52 mm 1.42 – 2.05 in.
373AA03 50 – 75 mm 1.97 – 2.95 in.
373AA04 75 – 100 mm 2.95 – 3.94 in.
373AA05 100 – 135 mm 3.94 – 5.31 in.
373AA06 135 – 170 mm 5.31 – 6.69 in.
Note: All sizes have stud clearance holes of 15.5mm, allowing fixing sizes M10, M12 & M14 to be used.
Download PDF File for Additional Information on Prysmian BICON Single Way Polyamide Cleat 373AA Series.
FREE Technical Advisory Service
E-Tech Components UK Ltd maintains a free technical advisory service.
Contact us for enquiries concerning this and all other products: +44 (0) 1744 762 929
| Design Number | Cable Diameter ∅ (mm) |
|---|---|
| Design Number373AA00 | Cable Diameter ∅ (mm)15 – 26 mm |
| Design Number373AA01 | Cable Diameter ∅ (mm)26 – 38 mm |
| Design Number373AA02 | Cable Diameter ∅ (mm)36 – 52 mm |
| Design Number373AA03 | Cable Diameter ∅ (mm)50 – 75 mm |
| Design Number373AA04 | Cable Diameter ∅ (mm)75 – 100 mm |
| Design Number373AA05 | Cable Diameter ∅ (mm)100 – 135 mm |
| Design Number373AA06 | Cable Diameter ∅ (mm)135 – 170 mm |
| Part No | Cable ∅ |
| Part No373AA00 | Cable ∅15 - 26 mm |
| Part No373AA01 | Cable ∅26 - 38 mm |
| Part No373AA02 | Cable ∅36 - 52 mm |
| Part No373AA03 | Cable ∅50 - 75 mm |
| Part No373AA04 | Cable ∅75 - 100 mm |
| Part No373AA05 | Cable ∅100 - 135 mm |
| Part No373AA06 | Cable ∅135 - 170 mm |
| Note: All sizes have stud clearance holes of 15.5mm, allowing fixing sizes M10, M12 & M14 to be used. | |
| * Technical Data Subject to change without notice. |
