Furukawa AQUA Connector

Product overview

Furukawa AQUA Connector

Furukawa AQUA Connector (AQUA-Nut and AQUA-Mouth) is used to provide a watertight interface for connecting EFLEX Square or EFLEX Round to plastic or concrete chambers/ catchpits. The connector requires no tools (can be installed in less than 1 minute) and features a non-woven, water-expansion cloth. Installed in less than 1 minute and fits any wall thickness.

Please note that EFLEX Square must be converted to EFLEX Round before using the Connector.

Part Numbers: FOKC-50, FOKC-80, FOKC-100, FOKC-130, FOKC-150

Connection Procedure

1. Cut a hole in the chamber/ catchpit according to the table below.

Connector Part No Min-Max

Hole Diameter Recommended

Size of Hole

FOKC-30 42-50mm 45mm

FOKC-40 58-65mm 60mm

FOKC-50 68-75mm 70mm

FOKC-65 89-96mm 90mm

FOKC-80 106-112mm 110mm

FOKC-100 135-141mm 135mm

2. Screw the AQUA-Nut onto EFLEX Round (or Converter to EFLEX Round).

3. Insert EFLEX into the chamber/ cathchpit wall.

4. From inside the chamber/ cathchpit, screw the AQUA-Mouth into EFLEX Round.

5. Hand-tighten the AQUA-Nut to the outside of the chamber/ cathchpit wall.

6. Please follow the ‘t’ reference value in the below table when hand-tightening the AQUA Connector:

Connector Part No Reference value ‘t’

FOKC-30 Approx. 6mm

FOKC-40,-50,-65,-80 Approx. 7mm

FOKC-100 Approx. 8mm

System & Accessories

For more information on Furukawa AQUA Connector, please advise PDF Files below.

FREE Technical Advisory Service

E-Tech Components UK Ltd maintains a free technical advisory service.

Contact us for enquiries concerning this and all other products: +44 (0) 1744 762 929