Snake Tray 653 Series – Aluminium Cable Tray Accessories

Product overview

Snake Tray 653 Series – Aluminium Cable Tray Accessories are a light weight for easier installation while offering a high loading capacity to manage large cable runs. Components are easy to attach with our quick connection system. Snake Tray is pleased to offer these solutions to accommodate our customer’s needs for larger cable trays. The full range of Snake Tray 653 Series aluminium cable trays and accessories is manufactured in Snake Tray’s factory and stand ready to deliver to your next project. Popular Accessories: Expansion Splice Plates, Cable Drop-Outs, Trapeze Support Kits, Cable Tray Wall Brackets and more. cable tray wall bracket

Snake Tray is the world’s only hand-bendable cable tray that requires no labor-intensive cutting and clipping in order to construct fast cable tray bends. Installs overhead, on walls and under access floors.

Its hand bendable design combined with Snake Tray’s built-in mounting hardware gives Snake Tray the installation cost saving advantage over any other cable tray system in today’s market. Installers are able to create turns in 10 seconds versus 20 minutes with wire mesh cable tray! cable tray wall bracket

Features & Benefits

Snake Tray 653 Aluminium Cable Tray Accessories feature:

Light weight aluminium

High loading capacity to handle large cable runs

Easy connection system

Made in the USA

Snake Tray 653 Series – Aluminium Cable Tray Accessories

In-Line Locking Splice Plates

Standard 4-hole pattern.

Furnished in pairs, with hardware.

One pair including hardware provided with each section.

For field installation drill 13/32” hole.

Part No: CM 653-4-SP-01, Size: 4″

Part No: CM 653-6-SP-01, Size: 6″

Expansion Splice Plates

Expansion Splice Plates allow for one inch expansion or contraction of the cable tray, or where expansion joints occur in the supporting structure. Furnished in pairs with hardware. Bonding Jumpers are required on each side-rail. Order Separately.

Part No: CM 653-4-ESP-01, Size: 4″

Part No: CM 653-6-ESP-01, Size: 6″

Vertical Adjustable Splice Plates

Provides for changes in elevation that do not conform to standard vertical fittings. Furnished in pairs hardware. Bonding Jumper not required.

Part No: CM 653-4-VASP-01, Size: 4″

Part No: CM 653-6-VASP-01, Size: 6″

Cable Drop-Out

These components provide a rounded surface to protect cable as it exits from the cable tray. Hardware is included.

Part No: CM 653-TO-T-06, Size: 6″

Part No: CM 653-TO-T-09, Size: 9″

iPart No: CM 653-TO-T-12, Size: 12″

Part No: CM 653-TO-T-18, Size: 18″

iPart No: CM 653-TO-T-24, Size: 24″

Part No: CM 653-TO-T-30, Size: 30″

Part No: CM 653-TO-T-36, Size: 36″

Tray Divider, Straight Section

These components create a vertical barrier when installed into the cable tray straight section. Furnished with three #10 x ½” zinc plated self-drilling screws. Standard length is 60″ (5 ft.), sold individually.

Part No: CM 653-4-DG, Size: 4″

Part No: CM 653-6-DG, Size: 6″

Tray Divider, Horizontal Bend

Horizontal Bend Barriers are flexible in order to conform to any horizontal radius. Cut to length. Furnished with three #10 x ½” zinc plated self-drilling screws. Standard length is 60″ (5 ft.), sold individually.

Part No: CM 653-4-DG-H, Size: 4″

Part No: CM 653-6-DG-H, Size: 6″

End Cap

Creates a barrier at the terminal end on the cable tray run. Furnished with installation hardware. Sold Individually.

Part No: CM 653-4-EC, Size: 4″

Part No: CM 653-6-EC, Size: 6″

Bonding Jumper

Use at each expansion splice and where the cable tray is not mechanically/electrically continuous to ground. Sold individually. Installation hardware included. Bonding jumper is 16″ long.

Part No: CM BJ-1, #1 Copper Wire Size / 600 amps

iPart No: CM BJ-4/0, 4/0 Copper Wire Size / 1600 amps

Part No: CM BJ-250, 250 MCM Copper Wire Size / 2000 amps

Threaded Rod

Bonding Jumper not required. Loading based on safety factor 5. Standard Finish: Zinc plated

Part No: TR-1-G, Size: 3/8″ – 16 x 1′

Part No: TR-2-G, Size: 3/8″ – 16 x 2′

iPart No: TR-3-G, Size: 3/8″ – 16 x 3′

Part No: TR-4-G, Size: 3/8″ – 16 x 4′

Part No: TR-5-G, Size: 3/8″ – 16 x 5′

iPart No: TR-6-G, Size: 3/8″ – 16 x 6′

Part No: TR-8-G, Size: 3/8″ – 16 x 8′

Part No: TR-10-G, Size: 3/8″ – 16 x 10′

iPart No: TR-1/2-1-G, Size: ½” – 13 x 1′

Part No: TR-1/2-2-G, Size: ½” – 13 x 2′

Part No: TR-1/2-3-G, Size: ½” – 13 x 3′

iPart No: TR-1/2-4-G, Size: ½” – 13 x 4′

Part No: TR-1/2-5-G, Size: ½” – 13 x 5′

Part No: TR-1/2-6-G, Size: ½” – 13 x 6′

iPart No: TR-1/2-8-G, Size: ½” – 13 x 8′

Part No: TR-1/2-10-G, Size: ½” – 13 x 10′

Part No: TR-5/8-1-G, Size: 5/8″ – 11 x 1′

iPart No: TR-5/8-2-G, Size: 5/8″ – 11 x 2′

Part No: TR-5/8-3-G, Size: 5/8″ – 11 x 3′

Part No: TR-5/8-4-G, Size: 5/8″ – 11 x 4′

iPart No: TR-5/8-5-G, Size: 5/8″ – 11 x 5′

Part No: TR-5/8-6-G, Size: 5/8″ – 11 x 6′

Part No: TR-5/8-8-G, Size: 5/8″ – 11 x 8′

iPart No: TR-5/8-10-G, Size: 5/8″ – 11 x 10′

Rod Coupling

Part No: CM RC-38, Size: 3/8″

iPart No: CM RC-12, Size: ½”

Part No: CM RC-58, Size: 5/8″

Nuts

Part No: CM HN-38, Size: 3/8″

iPart No: CM HN-12, Size: ½”

Part No: CM HN-58, Size: 5/8″

Trapeze Support Kit

Snake Tray trapeze kits provide the necessary components for a single trapeze support in one kit. These kits are available in pre-galvanized steel with zinc-plated hardware. The support bar provides convenient pre-punched slots, eliminating the need for field drilling. The entire kit is sealed in a plastic bag and boxed with the channel, which is pre-cut to the appropriate length as shown in the chart. Designed for use with ½” threaded rod. Order rod separately.

Part No: CM 653-TS-06, 6″ Tray Width / 14″ Channel Length

Part No: CM 653-TS-09, 9″ Tray Width / 16″ Channel Length

iPart No: CM 653-TS-12, 12″ Tray Width / 20″ Channel Length

Part No: CM 653-TS-18, 18″ Tray Width / 26″ Channel Length

Part No: CM 653-TS-24, 24″ Tray Width / 32″ Channel Length

iPart No: CM 653-TS-30, 30″ Tray Width / 38″ Channel Length

Part No: CM 653-TS-36, 36″ Tray Width / 44″ Channel Length

Rooftop Support Bases with Channel

Designed for use as a rooftop support for cable tray. Each support has rubberized pads on the underside of each leg to minimize any chaffing of the existing rooftop. Can be used with any of Snake Tray cable tray clamps and guides. Ultimate Load Capacity: 1,000 lbs. (uniform load).

Part No: CM 653-RS-28, Size: 5 5/8″ x 6″ x 28.0″

Part No: CM 653-RS-36, Size: 5 5/8″ x 6″ x 36.0″

iPart No: CM 653-RS-42, Size: 5 5/8″ x 6″ x 42.0″

Part No: CM 653-RS-50, Size: 5 5/8″ x 6″ x 50.0″

Part No: CM 653-RS-60, Size: 5 5/8″ x 6″ x 60.0″

Center Hung Tray Support

Center Hung Cable Tray Support allows cable to be installed from both sides. Eliminates costly cable pulling and field cutting of cable tray supports. Labor costs are drastically reduced. Required hardware and threaded rod material for trapeze assemblies are reduced by 50%. Designed for use with ½” threaded rod. (Order rod separately). Use with all aluminium and steel cable trays up to 24″ in width. Load capacity is 700 lbs. per support. Safety factor of 3.0. Eccentric loading is not to exceed a 60% vs. 40% load differential. The maximum recommended unsupported span length is 144″/12 ft. (3.66m). Furnished with installation hardware.

Part No: CM 653-CS-18, Size: 18″ H

Part No: CM 653-CS-30, Size: 30″ H

Wall Bracket

Wall bracket allows for the cable tray to be attached to a vertical surface. Constructed from steel, this bracket will support the tray as well as the load. Wall anchors MUST be designed to handle a shear load of the bracket as well as the load with a safety factor of 2.5. Eccentric loading is not to exceed 60% vs. 40% load differential. 24″, 30″ and 36″ wall mounted tray support with gusset

Part No: CM 653-WB-06, Size: 6″

Part No: CM 653-WB-09, Size: 9″

iPart No: CM 653-WB-12, Size: 12″

Part No: CM 653-WB-18, Size: 18″

Part No: CM 653-WB-24, Size: 24″

iPart No: CM 653-WB-30, Size: 30″

Part No: CM 653-WB-36, Size: 36″

Vertical Hanger Splice Plates

Design Load is 1500#/pair Safety factor of 2.5. Furnished in pairs. Designed for use with either ½” threaded rod. (Order rod separately).

Part No: CM 653-4-VHSP, Size: 4″

Part No: CM 653-6-VHSP, Size: 6″

Heavy Duty Hold-Down Bracket

For 4″ or 6″ Aluminium Cable Tray. Design load is 4,000#/pair. Four bolt attachment. Cable Tray attachment hardware is included. Hardware to attach the bracket to the substrate sold separately. Recommended for support of vertical pathways.

Part No: CM 653-HDB

Triangle Wall Bracket

Part No: CM 610-WBN-001

For Additional Information on Snake Tray 653 Series – Aluminium Cable Tray Accessories (Splice Plates, Wall Brackets, etc.), please consult PDF File or Technical Data Table below.

FREE Technical Advisory Service

E-Tech Components UK Ltd maintains a free technical advisory service.

Contact us for enquiries concerning this and all other products: +44 (0) 1744 762 929