BAND-FAST Flat Seal
BAND-FAST Flat Seal (BFYE) (Pre-Bent - BFXE) is a compact, secure and efficient banding solution designed for low-profile applications.
View Product
Authentic Filoform supply with full manufacturer backing.
Compliant with Saudi Aramco, SEC & GCC industrial codes.
MTR & batch inspection certificates available on request.
Direct dispatch from Dammam & Dhahran logistics hubs.
Technical Support Desk
Application sizing & submittal queries
Official quotation with project pricing, submittals, and lead-time schedules.
Filoform FiloSeal+ Duct Sealing System is a universal solution for sealing cables and pipes in ducts or bore holes. Suitable for sealing several cables or pipes contained in one duct and also allows re-entry of the seal to add or remove cables or pipes as required.
Telstra / TPG Approved Duct sealing kit in accordance with Telstra document ID TM00042A01
The Filoform duct sealing system FiloSeal+ uses MD+ sealant which is easily applied from a standard skeleton gun. The high quality, one component, flexible sealant “MD+” is based on a silicon compound that cures with air (Humidity).
After application and full curing the thixotropic MD+ forms a plastic elastomer mass with special qualities effectively sealing and bonding, while providing a high level of durability.
FiloSeal+ is very easy to apply regardless of the type of cable scenario in the cable ducts as it uses a uniquely shaped foam piece which positions neatly around the cables or pipes in the duct.
The unique design of the tri-flexible foam makes positioning and separation of the cables very simple while also providing a backing for the MD+ to be applied on.
This seal is easily installed in vertical scenarios while providing the added security of ensuring no loss of components down the duct.
FiloSeal+ is suitable for sealing several cables or pipes contained in one duct and also allows re-entry of the seal to add or remove cables or pipes as required.
Filoform FiloSeal+ Duct Seal – Key Features
Flexible, one component, adhesive and sealing compound in a cartridge – (310ml)
Kits are complete with backing and mastic to fill an empty duct of the quoted kit size
High levels of Gas and Water tightness
Excellent adhesion
Shows Fire resistance properties
Resistant against Water, Alkaline, Chemical agents
Resistant to, Petrol, Diesel, Ethanol, ASTM oil, LPG & Many more.
Suitable for sealing underground cable ducts set out within the APEA ‘Blue Book’
Resistant to Hydrogen Sulphide / Methane and many other Gases (NedLab)
Non-corrosive
Solvent-free
Shock absorbing
Non-toxic, neutral and almost odourless
Also suitable for limiting the EX-zones during transitions (observe chemical resistance)
Complies with 2011 NEC Articles 225.27, 230.8, 300.5(G), 300.7 (A) on Raceway Seals, and 501.15 (B)(2)
WIMES Compliant, (3.02 2013 clause 6.4.3.2 d)
Suitable for any shaped duct /borehole/opening
Quick and easy installation
A complete kit for one duct
Seals all know materials, PVC & PE sheathed cables, PILC, (HD) PE pipes
Suitable for renovations, can be installed retrospectively
Over 25 years of operational experience
Filoform FiloSeal+ Duct Seal – Approvals
Thames Water Approved
Welsh Water Approved
Severn Trent Water Approved
Southern Water Approved
Anglian Water Approved
South East Water Approved
Yorkshire Water Approved
Bournemouth Water Approved
For Additional Information on Filoform FiloSeal+ 125mm (282580) and 200mm (282590), please refer to the Technical Data Table below or download PDF File.
MGA Trading, Dammam, maintains a technical advisory service.
Contact us: +966 13 882 1111 / +966 13 831 1116
| Part Number | Product Name |
|---|---|
| Part Number282580 | Product NameFiloSeal+ 125mm |
| Part Number282590 | Product NameFiloSeal+ 200mm |
| Specifications | — |
| Property | Value |
| PropertyDensity | Value1.2 gr/cm³ |
| PropertyFlow | Value< 2mm |
| PropertyColour | Valuered-brown |
| PropertySkin over time (23C/55%RH) | Value± 15 minutes |
| PropertyCuring | Value3 mm / 24 hours |
| PropertyHardness | Value30 shore A |
| PropertyElongation | Value100% |
| PropertyTensile strength | Value0.8 N/mm² |
| PropertyOperating temperature | Value+5°C to +40°C |
| PropertyTemperature resistance | Value-40°C to +120°C |
BAND-FAST Flat Seal (BFYE) (Pre-Bent - BFXE) is a compact, secure and efficient banding solution designed for low-profile applications.
View Product
BAND-FAST (Bandfast) Open End with Centre Punch Clip (010S99, 016S99) – pre-cut, pre-assembled banding for faster installs and less waste.
View Product
BAND-FAST with Clip (L22199, L22999, L28499 etc.) – a fast, efficient solution for bundling, fastening & clamping in demanding applications.
View Product
BAND-FAST with COLOR-IT (BFVC, BFPC) (Valuclip, Center Punch) - ready-to-use, pre-assembled banding solution for fast and precise bundling.
View ProductSubmit your required quantities, technical schedules, and delivery milestones. The item reference (Part_Number282580) is automatically routed to our industrial sales engineering desk.