Snake Tray 454 Series – Accessories

Product overview

Snake Tray 454 Series – Accessories include Connector Bolts, Universal 201 Series Intersection, Beam Clamp for 3/8″ Threaded Rod, Pedestal Mount Brackets, Seismic Bracing Kits, Concrete Anchors, Hanger Brackets for Threaded Rod Suspension and Attachment Hardware for 454 series cable tray.

Snake Tray 454 Series – Cable Tray & Accessories is the next generation in our hand bendable cable trays that can be mounted overhead or on a wall in one easy-to-install system.

Snake Tray is the world’s only hand-bendable cable tray that requires no labor-intensive cutting and clipping in order to construct fast cable tray bends. Installs overhead, on walls and under access floors.

Its hand bendable design combined with Snake Tray’s built-in mounting hardware gives Snake Tray the installation cost saving advantage over any other cable tray system in today’s market. Installers are able to create turns in 10 seconds versus 20 minutes with wire mesh cable tray!

Features

Patented hand bendable design (No fabrication required)

Built-in mounting/hanging hardware can be suspended overhead or mounted to the wall

Single connection creates both mechanical and electrical bond

Hangs or mounts from a single Point

Trays nest together for compact and cost effective shipping and material handling

Open architecture for easy loading of cable

Snake Tray 454 Series – Accessories

Universal Tray Connector Bolt

The CB-10 provides both a mechanical and electrical connection when joining the tray sections to one another. Only one CB-10 required per connection.

Part No: CB-10

Universal Inline Connector Bolt

Provides a mechanical and a bonded electrical connection when joining tray sections to one another. Only one CB-12 required per connection.

Part No: CB-12

Universal 201 Series Intersection

Installed as 4-way crossing intersection component for the 201 Snake Tray Series.

Part No: CM 0303H, Size: 5 ½” x 5 ½”

Beam Clamp for 3/8″ Threaded Rod

Part No: BC-201-A

Pedestal Mount Bracket for 201 Series

Used to attach single pocket 201 series Snake Tray to the floor pedestals utilized in the construction of raised access floors.

Part No: ST-201

Seismic Bracing Kits with Crimp Tool & Cutter

Part Nos:

CM201/801-SBK1-XX: Kit for Anchoring Snake Tray and Mega Snake in Concrete Ceilings

CM 201/801-SBK-J-XX: Kit for Anchoring Snake Tray and Mega Snake around Joists

CM 201/801-SBK-L-XX: Kit for Anchoring Snake Tray and Mega Snake with Lag Bolts into Wood Beams

CM 201/801-SB-CT: Crimp Tool

CM 201/801-SB-CU: Cutter

*XX Denotes size

Threaded Rod

Pre-cut and pre-chased threaded rod for overhead tray installations. All rods are 3/8″-16 10/24 high strength steel as per ASTM A36 and available in 1′, 2′, 3′, 4′ 6′, and 8′ lengths. Rods are inserted through the patented Snake Eyes and secured with two 3/8″ hex nuts and one flat washer. No additional mounting accessories are necessary.

Part No: TR-1, Size: 3/8″ x 12″ Threaded Rod

Part No: TR-2, Size: 3/8″ x 24″ Threaded Rod

Part No: TR-3, Size: 3/8″ x 36″ Threaded Rod

Part No: TR-4, Size: 3/8″ x 48″ Threaded Rod

Part No: TR-6, Size: 3/8″ x 72″ Threaded Rod

Part No: TR-8, Size: 3/8″ x 96″ Threaded Rod

Concrete Wedge Anchor

Anchor diameter equals hole diameter. Comes complete with nuts and washers ready for use. Collar expander offers 360° contact with masonry. Projections on collar immediately grip concrete.

Part Nos: CM WA-XX

*XX Denotes size

Concrete Anchor

Stud type anchor design allows easy through-type fastenings and can be set in bottomless hole. Pre-assembled anchor ensures easy and fast installation. Anchor size is same as drill bit size for easy installation. Comprehensive testing to ensure high performance in block, masonry and concrete base materials. Bulged middle section with round and diamond shaped openings prevents the anchors from spinning in the hole or dropping out when setting it overhead. Anchors 101 and 407 series of any applications with a 1/4″ hole.

Part Nos: CM CA-38

Hanger Bracket for Threaded Rod Suspension

Hanger bracket for powder-actuated fastening. Design allows for easy installation using any 8 mm power actuated fastening system. Available for both steel and concrete. The New, Versatile Hanger that Simplifies Threaded Rod Suspension.

Part Nos: CM TR-HBS for Steel, CM TR-HBC for Concrete

Attachment Hardware

Part No: CM FW-38, Size: Zinc Plated 3/8″ Washer

Part No: CM HN-38, Size: Zinc Plated 3/8″ Hex Nut

Part No: CM RC-38, Size: ZZinc Plated 3/8″ Rod Coupling

For Additional Information on Snake Tray 454 Series – Accessories (Cable Tray Connector Bolts, Universal 201 Intersections, Beam Clamps, Pedestal Mount Brackets, etc.), please consult PDF File or Technical Data Table below.

FREE Technical Advisory Service

E-Tech Components UK Ltd maintains a free technical advisory service.

Contact us for enquiries concerning this and all other products: +44 (0) 1744 762 929