Home>Cable Accessories>Cable Glands & Kits>Hazardous Cable Glands & Kits
CCG E1EX Deluge Seal Captive Component Gland (0523) is a Hazardous Area Glanding Device for Steel and Aluminium Armoured Cable. Suitable for indoors, outdoors, Group II, III, Zone 1, 2, 21 and 22 hazardous areas.
CCG Part Numbers: 052300-16, 052300, 0523-0, 052301, 052322, 052302, 052333, 052303, 052344, 052304, 052355, 052305, 052366, 052306, 052377, 052307, 052308, 052399, 052309, 052310, 052311, 052312, 052313
Features & Benefits – CCG E1EX Deluge Seal
For indoors, outdoors, Group II, III, Zone 1, 2, 21 and 22 hazardous areas.
Two part handling, no loose parts.
Freely rotating captive cone and inspectable cone ring provides an armour clamp and earth bond on steel wire and aluminium armour.
Patented disconnect system allows for inspection of armour clamp and inner seal after assembly.
With a patented Variable Deluge Seal™ as standard.
Factory fitted with a specially formulated elastomeric seal for Built-in Safety™, seals on the inner and outer sheath of the cable to IP65/66/68.
Precision manufactured from high-quality brass (Marine Grade Electroless Nickel Plated™) available in aluminium or stainless steel 316/316L on request.
Supplied with a thread sealing gasket (parallel threads only).
Type: E1EX
Equipment Protection Levels: Ex db IIC, Ex eb IIC, Ex tb IIIC, Ex nR IIC
Gland Material: Brass (Marine Grade Electroless Nickel Plated™), Aluminium, Stainless Steel 316/316L
Seal Material: Standard Thermoset Elastomer or Extreme Temperature Seals
Sealing Gasket Material: HDPE, Nylon 66 or PTFE
Cable Type: Steel Wire Armour and Aluminium Armour
Armour Clamping: Rotating Captive Cone and Inspectable Cone Ring
Sealing Area: Inner Sheath, Outer Sheath and Variable Deluge Seal™
Optional Accessories: Adaptor, Reducer, Earth Tag, Locknut, Serrated Washer and Shroud
Note: The installer should ensure that the materials are suitable for the installation environment.
Installation Standards
IEC/BS EN
IECEx
ATEX
UKEX
INMETRO (Brazil)
TR CU (Russia)
CNEx (China)
SANS
Ingress Protection
Deluge Protection
Corrosion Protection
Marine ABS
DNV-GL
EMC Compatible
A Hazardous Area is one in which there is potential for an explosion of gases, vapours, mists or dust or a combination of these. Such locations are petrochemical plants, offshore oil rigs, fuel filling stations, timber mills, coal mines, flour mills, paint spray booths, sewerage treatment plants, hospitals, explosive magazines and more.
Special precautions must be taken for the design, manufacture, installation and use of equipment and cable glands in such hazardous areas. Persons involved in selecting installing and maintaining electrical equipment for use in hazardous areas should be competently trained, have a full understanding of what a hazardous area is and have knowledge of the equipment protection levels and the installation standards involved.
Additional Technical Data on CCG E1EX Deluge Seal Captive Component Gland (0523) Part Numbers can be found on the table below. For Conforming Standards & Certificates as well as Fitting Instructions, please advise PDF File.
FREE Technical Advisory Service
E-Tech Components UK Ltd maintains a free technical advisory service.
Contact us for enquiries concerning this and all other products: +44 (0) 1744 762 929
| Product Code | Gland Size Ref. |
|---|---|
| Product Code052300-16 | Gland Size Ref.00-16ss |
| Product Code052300 | Gland Size Ref.00-20ss |
| Product Code0523-0 | Gland Size Ref.0-20s |
| Product Code052301 | Gland Size Ref.1-20 |
| Product Code052322 | Gland Size Ref.2s-25s |
| Product Code052302 | Gland Size Ref.2-25 |
| Product Code052333 | Gland Size Ref.3s-32s |
| Product Code052303 | Gland Size Ref.3-32 |
| Product Code052344 | Gland Size Ref.4s-40s |
| Product Code052304 | Gland Size Ref.4-40 |
| Product Code052355 | Gland Size Ref.5s-50s |
| Product Code052305 | Gland Size Ref.5-50 |
| Product Code052366 | Gland Size Ref.6s-63s |
| Product Code052306 | Gland Size Ref.6-63 |
| Product Code052377 | Gland Size Ref.7s-75s |
| Product Code052307 | Gland Size Ref.7-75 |
| Product Code052308 | Gland Size Ref.8-80 |
| Product Code052399 | Gland Size Ref.9s-90s |
| Product Code052309 | Gland Size Ref.9-90 |
| Product Code052310 | Gland Size Ref.10-100 |
| Product Code052311 | Gland Size Ref.11-115 |
| Product Code052312 | Gland Size Ref.12-120 |
| Product Code052313 | Gland Size Ref.13-130 |
| All dimensions except NPT are in mm. Intermediate thread sizes are available on request. NPT threads should be tightened ‘wrench tight’. |
