CCG Ex Corrosion Guard Lead Seal Cable Gland (0548)

Product overview

CCG Ex Corrosion Guard Lead Seal Cable Gland (0548)

CCG Ex Corrosion Guard Lead Seal Cable Gland (0548) is a Hazardous Area Glanding Device for Lead Sheathed Cable. Suitable for highly corrosive, wet locations, Group II, III, Zone 1, 2, 20, 21 and 22 hazardous areas.

CCG Part Numbers: 054800-16-LS, 054800-LS, 0548-0-LS, 054801-LS, 054802s-LS, 054802-LS, 054803s-LS, 054803-LS, 054804s-LS, 054804-LS, 054805s-LS, 054805-LS, 054806s-LS, 054806m-LS, 054806L-LS, 054807s-LS, 054807m-LS, 054807L-LS, 054808-LS, 054809s-LS, 054809-LS, 054810-LS

Features & Benefits

For highly corrosive, wet locations, Group II, III, Zone 1, 2, 20, 21 and 22 hazardous areas.

Cable gland is precision manufactured from high-quality brass (Marine Grade Electroless Nickel Plated™).

Lead seals supplied to match the exact dimensions of cable given by the customer.

Two-part handling, freely rotating captive cone and inspectable cone ring provides an armour clamp and earth bond for steel wire armour.

Corrosion Guard® screws onto the gland body and seals over the outer sheath of the cable giving an IP68 and deluge proof seal protecting the armour and metal parts of the gland.

Supplied with a thread sealing gasket (parallel threads only).

CCG Ex Corrosion Guard Lead Seal Technical Data

Type: Ex Corrosion Guard Lead Seal

Equipment Protection Levels: Ex db IIC, Ex eb IIC, Ex ta IIIC, Ex nR IIC

Gland Material: Brass (Marine Grade Electroless Nickel Plated™)

Corrosion Guard Material: Glass Reinforced Polyester Compound / PBT

Seal Material: Standard Thermoset Elastomer or Extreme Temperature Seal and Lead

Sealing Gasket Material: HDPE, Nylon 66 or PTFE

Cable Type: Steel Wire Armour, Lead Sheath

Armour Clamping: Captive Rotating Cone and Inspectable Cone Ring

Sealing Area: Inner Sheath, Outer Sheath and total enclosure of the gland

Optional Accessories: Adaptor, Reducer, Locknut and Serrated Washer

Note: The installer should ensure that the materials are suitable for the installation environment.

Installation Standards

IEC/BS EN

IECEx

ATEX

UKEX

INMETRO (Brazil)

TR CU (Russia)

SANS

Ingress Protection

Deluge Protection

Corrosion Protection

Marine ABS

DNV-GL

EMC Compatible

Hazardous Areas

A Hazardous Area is one in which there is potential for an explosion of gases, vapours, mists or dust or a combination of these. Such locations are petrochemical plants, offshore oil rigs, fuel filling stations, timber mills, coal mines, flour mills, paint spray booths, sewerage treatment plants, hospitals, explosive magazines and more.

Special precautions must be taken for the design, manufacture, installation and use of equipment and cable glands in such hazardous areas. Persons involved in selecting installing and maintaining electrical equipment for use in hazardous areas should be competently trained, have a full understanding of what a hazardous area is and have knowledge of the equipment protection levels and the installation standards involved.

Additional Technical Data on CCG Ex Corrosion Guard Lead Seal Cable Gland (0548) Part Numbers can be found on the table below. For Conforming Standards & Certificates as well as Fitting Instructions, please advise PDF File.

FREE Technical Advisory Service

E-Tech Components UK Ltd maintains a free technical advisory service.

Contact us for enquiries concerning this and all other products: +44 (0) 1744 762 929