CCG A2 EMC Single Compression Cable Gland (0535)
CCG A2 EMC Single Compression Cable Gland is an Industrial Cable Gland Device for Braided and Copper Tape Cable, for indoor and outdoor use.
View Product
Authentic CCG - Captive Cone Glands supply with full manufacturer backing.
Compliant with Saudi Aramco, SEC & GCC industrial codes.
MTR & batch inspection certificates available on request.
Direct dispatch from Dammam & Dhahran logistics hubs.
Technical Support Desk
Application sizing & submittal queries
Official quotation with project pricing, submittals, and lead-time schedules.
CCG FLP Captive Component Cable Gland (0521) is a Hazardous Area Glanding Device for Steel Wire Armoured Cable. Suitable for Group I underground mines, Group II, III, Zone 1, 2, 21 and 22 hazardous areas.
CCG Part Numbers: 052100-16, 052100, 0521-0, 052101, 052102, 052103, 052104, 052155, 052105, 052166, 052106, 052107
Features & Benefits
For Group I underground mines, Group II, III, Zone 1, 2, 21 and 22 hazardous areas.
Two-part handling, freely rotating captive cone and inspectable cone ring provides an armour clamp and earth bond on the steel wire armour.
Factory fitted with a specially formulated elastomeric seal, providing Built-in Safety™.
No loose parts that can get lost.
Precision manufactured from high-quality brass (Marine Grade Electroless Nickel Plated™) available in stainless steel 316/316L on request.
Supplied with a thread sealing gasket (parallel threads only).
Type: FLP
Equipment Protection Levels: Ex db I/IIC, Ex eb I/IIC, Ex ta IIIC, Ex nR IIC
Gland Material: Brass (Marine Grade Electroless Nickel Plated™), Stainless Steel 316/316L
Seal Material: Standard Thermoset Elastomer or Extreme Temperature Seals
Sealing Gasket Material: HDPE, Nylon 66 or PTFE
Cable Type: Steel Wire Armour
Armour Clamping: Captive Rotating Cone and Inspectable Cone Ring
Sealing Area: Inner Sheath
Note: The installer should ensure that the materials are suitable for the installation environment.
Installation Standards
IEC/BS EN
IECEx
ATEX
UKEX
INMETRO (Brazil)
TR CU (Russia)
SANS
Ingress Protection
Deluge Protection
Corrosion Protection
Marine ABS
DNV-GL
EMC Compatible
A Hazardous Area is one in which there is potential for an explosion of gases, vapours, mists or dust or a combination of these. Such locations are petrochemical plants, offshore oil rigs, fuel filling stations, timber mills, coal mines, flour mills, paint spray booths, sewerage treatment plants, hospitals, explosive magazines and more.
Special precautions must be taken for the design, manufacture, installation and use of equipment and cable glands in such hazardous areas. Persons involved in selecting installing and maintaining electrical equipment for use in hazardous areas should be competently trained, have a full understanding of what a hazardous area is and have knowledge of the equipment protection levels and the installation standards involved.
Additional Technical Data on CCG FLP Captive Component Cable Gland (0521) Part Numbers can be found on the table below. For Conforming Standards & Certificates as well as Fitting Instructions, please advise PDF File.
MGA Trading, Dammam, maintains a technical advisory service.
Contact us: +966 13 882 1111 / +966 13 831 1116
| Product Code | Gland Size Ref. |
|---|---|
| Product Code052100-16 | Gland Size Ref.00-16ss |
| Product Code052100 | Gland Size Ref.00-20ss |
| Product Code0521-0 | Gland Size Ref.0-20s |
| Product Code052101 | Gland Size Ref.1-20 |
| Product Code052102 | Gland Size Ref.2-25 |
| Product Code052103 | Gland Size Ref.3-32 |
| Product Code052104 | Gland Size Ref.4-40 |
| Product Code052155 | Gland Size Ref.5s-50s |
| Product Code052105 | Gland Size Ref.5-50 |
| Product Code052166 | Gland Size Ref.6s-63s |
| Product Code052106 | Gland Size Ref.6-63 |
| Product Code052107 | Gland Size Ref.7-75 |
| All dimensions except NPT are in mm. Intermediate thread sizes are available on request. NPT threads should be tightened “wrench tight”. | — |
CCG A2 EMC Single Compression Cable Gland is an Industrial Cable Gland Device for Braided and Copper Tape Cable, for indoor and outdoor use.
View Product
CCG A2 Single Compression Industrial Cable Gland is an Industrial Cable Gland Device for unarmoured cable, used both indoors and outdoors.
View Product
CCG A2EX-FHC Double Compression Cable Gland (0537) for Unarmoured Cable Housed in Conduit (Group II, III, Zone 1, 2, 20, 21 and 22).
View Product
CCG A2EX-VS Double Compression Cable Gland (0436) for Copper Tape, Braided or Lead-Sheathed Cable in Hazardous Areas.
View ProductSubmit your required quantities, technical schedules, and delivery milestones. The item reference (CCG_FLP_Captive_Component_Cable_Gland__0521_) is automatically routed to our industrial sales engineering desk.