Home>Cable Accessories>Cable Glands & Kits>Industrial Cable Glands & Kits
CCG A2FX-R Double Compression Cable Gland (0577) is a Hazardous Area Glanding Device for Unarmoured Cable. Suitable for Group I, II, III, Zone 1, 2, 20, 21 and 22 hazardous areas.
CCG Part Numbers: 057700-16S, 057700-16, 057700, 0577-0-16, 0577-0, 057701, 057722, 057702, 057733, 057703, 057744, 057704, 057755, 057705, 057766, 057706, 057777, 057707, 057708, 057799, 057710, 057711, 057712, 057713
Features & Benefits
Passes the IECEx / ATEX / UKEX 100% pull test so no additional cable clamping is necessary.
For indoor, outdoor, Group I, II, III, Zone 1, 2, 20, 21 and 22 hazardous areas.
Fitted with two specially formulated elastomeric displacement seals, for dual redundancy and superior cable retention, explosion protection and IP rating.
Precision manufactured from high quality brass (Marine Grade Electroless Nickel Plated™) available in aluminium or stainless steel 316/316L on request. (Note: Aluminium not suitable for Group I applications).
Supplied with a thread sealing gasket (parallel threads only).
Type: A2FX-R
Equipment Protection Levels: Ex db I/IIC, Ex eb I/IIC, Ex ta IIIC , Ex nR IIC
Gland Material: Brass (Marine Grade Electroless Nickel Plated™), Aluminium or Stainless Steel 316/316L
Seal Material: Standard Thermoset Elastomer or Extreme Temperature Seals
Sealing Gasket Material: HDPE, Nylon 66 or PTFE
Sealing Area: Outer Sheath (may be used on cables with inner and outer sheaths)
Optional Accessories: Adaptor, Reducer, Earth Tag, Locknut, Serrated Washer and Shroud
Note: The installer should ensure that the materials are suitable for the installation environment.
Installation Standards
IEC/BS EN
IECEx
ATEX
UKEX
INMETRO (Brazil)
TR CU (Russia)
CCC/CNEx (China)
SANS
Ingress Protection
Deluge Protection
Corrosion Protection
Marine ABS
DNV-GL
A Hazardous Area is one in which there is potential for an explosion of gases, vapours, mists or dust or a combination of these. Such locations are petrochemical plants, offshore oil rigs, fuel filling stations, timber mills, coal mines, flour mills, paint spray booths, sewerage treatment plants, hospitals, explosive magazines and more.
Special precautions must be taken for the design, manufacture, installation and use of equipment and cable glands in such hazardous areas. Persons involved in selecting installing and maintaining electrical equipment for use in hazardous areas should be competently trained, have a full understanding of what a hazardous area is and have knowledge of the equipment protection levels and the installation standards involved.
Additional Technical Data on CCG A2FX-R Double Compression Cable Gland (0577) Part Numbers can be found on the table below. For Conforming Standards & Certificates as well as Fitting Instructions, please advise PDF File.
FREE Technical Advisory Service
E-Tech Components UK Ltd maintains a free technical advisory service.
Contact us for enquiries concerning this and all other products: +44 (0) 1744 762 929
| Product Code | Gland Size Ref. |
|---|---|
| Product Code057700-16S | Gland Size Ref.00s-16S |
| Product Code057700-16 | Gland Size Ref.00s-16ss |
| Product Code057700 | Gland Size Ref.00s-20ss |
| Product Code0577-0-16 | Gland Size Ref.0s-16s |
| Product Code0577-0 | Gland Size Ref.0s-20s |
| Product Code057701 | Gland Size Ref.1-20 |
| Product Code057722 | Gland Size Ref.2s-25s |
| Product Code057702 | Gland Size Ref.2-25 |
| Product Code057733 | Gland Size Ref.3s-32s |
| Product Code057703 | Gland Size Ref.3-32 |
| Product Code057744 | Gland Size Ref.4s-40s |
| Product Code057704 | Gland Size Ref.4-40 |
| Product Code057755 | Gland Size Ref.5s-50s |
| Product Code057705 | Gland Size Ref.5-50 |
| Product Code057766 | Gland Size Ref.6s-63s |
| Product Code057706 | Gland Size Ref.6-63 |
| Product Code057777 | Gland Size Ref.7s-75s |
| Product Code057707 | Gland Size Ref.7-75 |
| Product Code057708 | Gland Size Ref.8-80 |
| Product Code057799 | Gland Size Ref.9s-90s |
| Product Code057709 | Gland Size Ref.9-90 |
| Product Code057710 | Gland Size Ref.10-100 |
| Product Code057711 | Gland Size Ref.11-110 |
| Product Code057712 | Gland Size Ref.12-120 |
| Product Code057713 | Gland Size Ref.13-130 |
| All dimensions are in mm (apart from NPT). Intermediate thread sizes are available on request. NPT threads should be tightened ‘wrench tight’. |
