Nexans Euromold 400T1 Equipment Bushing

Product overview

Nexans Euromold 400T1 Equipment Bushing

Nexans Euromold 400T1/ K400T1/ M400T1 Equipment Bushings are MV-HV Bushings for use in equipment insulated with oil fluid, typically for transformers, switchgear, capacitors that are specified to terminate and connect medium/high voltage cables in the following voltage classes:

6/10 (12kV)

6.35/11 (12kV)

8.7/15 (17.5kV)

12/20 (24kV)

12.7/22 (24kV)

18/30 (36kV)

Technical Characteristics

Each bushing is tested for AC withstand and partial discharge prior to leaving the factory.

The plug-in type equipment bushings are moulded epoxy insulated parts and meet the requirements of IEC 60137. The (K)(M)400T1 also meets CENELEC EN 50180.

Specification & Design

To order the equipment bushing, specify the type. We can supply the bushings with an earth jumper (/J) or an earth plate (/GS). This earth connection must be specified when ordering (e.g. K400T1/J):

Euromold Equipment

Bushing Type Voltage

Um Current

Ir

400T1 12 kV 400 Amps

K400T1 24 kV 400 Amps

M400T1 36 kV 400 Amps

Note: For dimensions of the above bushing types, refer to the Technical Data Table below.

Nexans Euromold 400T1 Fixings for Bushings

For Ordering Instructions and Part Number Selection Table of Nexans Euromold 400T1/ K400T1/ M400T1 Equipment Bushings, please refer to the Technical Data Table Below. For additional General and Technical Information, download the PDF files.

FREE Technical Advisory Service

E-Tech Components UK Ltd maintains a free technical advisory service.

Contact us for enquiries concerning this and all other products: +44 (0) 1744 762 929