Cable Accessories
Nexans Euromold 180A-24P-O In-Air Bushings for use in equipment insulated with air, typically for dry type transformers, motors, switchgear, capacitors that are specified to terminate and connect medium/high voltage cables in the following voltage classes:
6/10 (12kV)
6.35/11 (12kV)
8.7/15 (17.5kV)
12/20 (24kV)
12.7/22 (24kV)
Technical Characteristics
Each bushing is tested for AC withstand and partial discharge prior to leaving the factory.
The plug-in type equipment bushings are moulded epoxy insulated parts and meet the requirements of CENELEC EN 50180, IEC 60071 and IEC 60137.
To order the equipment bushing, specify the type. We can supply the bushings with an earth jumper. T include the ring clamp, add:
/B, if per British Standards
/D, if per German Standards
/F, if per French Standards, e.g. 180A-24P-O/F
Euromold Equipment
Bushing Type Voltage
Um Current
Ir
For Ordering Instructions and Part Number Selection Table, please refer to the Technical Data Table Below. For additional General and Technical Information, download the PDF files.
MGA Trading, Dammam, maintains a technical advisory service.
Contact us: +966 13 882 1111 / +966 13 831 1116
| Euromold Equipment Bushing Type | Voltage Um |
|---|---|
| Euromold Equipment Bushing Type180A-24P-O | Voltage Um12 or 24 kV |
| ORDERING INSTRUCTIONS To order the equipment bushing, specify the type. The bushings are supplied with an earth jumper. T include the ring clamp, add: /B, if per British Standards /D, if per German Standards /F, if per French Standards, e.g. 180A-24P-O/F | |
| EQUIPMENT BUSHING TYPE | VOLTAGE Um |
| EQUIPMENT BUSHING TYPE180A-24P-O | VOLTAGE Um12 or 24 kV |