Nexans Euromold 400AR-8 Equipment Bushing

Product overview

Nexans Euromold 400AR-8 Equipment Bushing

Nexans Euromold 400AR-8/ K400AR-8/ M400AR-8 Equipment Bushings are MV-HV Bushings for use in equipment insulated with oil fluid, typically for transformers, switchgear, capacitors that are specified to terminate and connect medium/high voltage cables in the following voltage classes:

6/10 (12kV)

6.35/11 (12kV)

8.7/15 (17.5kV)

12/20 (24kV)

12.7/22 (24kV)

18/30 (36kV)

19/33 (36kV)

Technical Characteristics

Each bushing is tested for AC withstand and partial discharge prior to leaving the factory.

The plug-in type equipment bushings 400AR-8 are moulded epoxy insulated parts and meet the requirements of CENELEC EN 50180 and IEC 60137 .

Specification & Design

To order the equipment bushing, specify the type. We can supply the bushings with an earth jumper (/J). This earth connection must be specified when ordering (e.g. M400AR-8/J):

Euromold Equipment

Bushing Type Voltage

Um Current

Ir

400AR-8 12 kV 250 Amps

K400AR-8 24 kV 250 Amps

M400AR-8 36 kV 250 Amps

Nexans Euromold 400AR8 Fixings for Bushings

For Ordering Instructions and Part Number Selection Table of Nexans Euromold 400AR-8/ K400AR-8/ M400AR-8 Equipment Bushings, please refer to the Technical Data Table Below. For additional General and Technical Information, download the PDF files.

FREE Technical Advisory Service

E-Tech Components UK Ltd maintains a free technical advisory service.

Contact us for enquiries concerning this and all other products: +44 (0) 1744 762 929