Home>Cable Accessories>Separable Connectors>Nexans Euromold Separable Connectors
Nexans Euromold 400TB Separable Tee Connector is a tee-connector (bolted type) used to terminate MV-HV XLPE/EPR (polymeric) insulated cables up to 42kV into 400 Series Interface C Bushings with M16 bolted connections on the medium/high voltage electrical equipment (transformers, switchgear, motors, etc.). Meets the requirements of CENELEC HD 629,1. Also used to connect cable to cable when using the appropriate mating parts.
Type 400TB Part Numbers: 400TB/G, K400TB/G, M400TB/G, P400TB/G.
Euromold 400TB is a bolted separable tee connector specified to terminate and connect medium/high voltage cables in the following voltage classes:
6/10 (12kV)
6.35/11 (12kV)
8.7/15 (17.5kV)
12/20 (24kV)
12.7/22 (24kV)
18/30 (36kV)
19/33 (36kV)
20.8/36 (42kV)
Technical Characteristics
The thick conductive EPDM jacket provides a total safe to touch screen which ensures safety for personnel.
Each separable connector is tested for AC withstand and partial discharge prior to leaving the factory.
The 400TB separable connector meets the requirements of CENELEC HD 629.1 S1.
Euromold
Type 400TB Voltage
Um Current
Ir for C1 Conductor Size
Min Conductor Size
Max
400TB/G 12 kV 630 Amps 35 mm2 300 mm2
K400TB/G 24 kV 630 Amps 35 mm2 300 mm2
M400TB/G 36 kV 630 Amps 35 mm2 240 mm2
Conductive EPDM insert
Conductive EPDM jacket
Insulating EPDM layer
Type C interface as described by CENELEC EN 50180 and 50181
Conductor contact
Basic insulating plug (with VD point)
Cable reducer
Conductive rubber cap
Clamping screw
The screen break design enables cable outer sheath testing without removing or dismantling the connector.
The complete (K)(M)(P)400TB/G tee connector kit comprises the following components. The kit also comprises silicone grease, gloves, wipers, roll adhesive tape and installation instructions.
For Ordering Instructions and Part Number Selection Table of Nexans Euromold 400TB Separable Tee Connector (400TB/G, K400TB/G, M400TB/G, P400TB/G), please refer to the Technical Data Table Below. For additional General and Technical Information, download the PDF files.
FREE Technical Advisory Service
E-Tech Components UK Ltd maintains a free technical advisory service.
Contact us for enquiries concerning this and all other products: +44 (0) 1744 762 929
| Euromold Type 400TB | Voltage Um |
|---|---|
| Euromold Type 400TB400TB/G | Voltage Um12 kV |
| Euromold Type 400TBK400TB/G | Voltage Um24 kV |
| Euromold Type 400TBM400TB/G | Voltage Um36 kV |
| Euromold Type 400TBP400TB/G | Voltage Um42 kV |
| ORDERING INSTRUCTIONS FOR (K)(M)(P)400TB To order the tee connector, select the ordering part number which gives you the best centring of your core insulation diameter and substitute X using table X, according to your conductor size and type. Add a 'K' for use up to 24 kV, an 'M' for use up to 36 kV, add a 'P' for use up to 42 kV. Example: The copper wire screened cable is 24 kV, 185 mm2 stranded copper with a diameter over core insulation of 27.5 mm. Order a 3 x K400TB/G-018-95.300UN5 tee connector kit. | |
| PART NUMBER | DIAMETER OVER CORE INSULATION MIN |
| PART NUMBER400TB/G-011-X | DIAMETER OVER CORE INSULATION MIN12 mm |
| PART NUMBER400TB/G-015-X | DIAMETER OVER CORE INSULATION MIN16 mm |
| PART NUMBER400TB/G-018-X | DIAMETER OVER CORE INSULATION MIN19 mm |
| PART NUMBER400TB/G-021-X | DIAMETER OVER CORE INSULATION MIN22 mm |
| PART NUMBER400TB/G-027-X | DIAMETER OVER CORE INSULATION MIN28.5 mm |
| TABLE X - ALUMINIUM & COPPER CONDUCTOR | |
| CONDUCTOR SIZE | BOLTED |
| CONDUCTOR SIZE16 mm2 | BOLTED16.95UN5 |
| CONDUCTOR SIZE25 mm2 | BOLTED16.95UN5 |
| CONDUCTOR SIZE35 mm2 | BOLTED16.95UN5 |
| CONDUCTOR SIZE50 mm2 | BOLTED16.95UN5 |
| CONDUCTOR SIZE70 mm2 | BOLTED16.95UN5 |
| CONDUCTOR SIZE95 mm2 | BOLTED16.95UN5 |
| CONDUCTOR SIZE120 mm2 | BOLTED- |
| CONDUCTOR SIZE150 mm2 | BOLTED- |
| CONDUCTOR SIZE185 mm2 | BOLTED- |
| CONDUCTOR SIZE240 mm2 | BOLTED- |
| CONDUCTOR SIZE300 mm2 | BOLTED- |
