Home>Cable Accessories>Separable Connectors>Nexans Euromold Separable Connectors
Nexans Euromold 400AR-4BC/ K400AR-4BC Equipment Bushings are MV-HV Bushings for use in equipment insulated with air, typically for switchgear, capacitors, motors that are specified to terminate and connect medium/high voltage cables in the following voltage classes:
6/10 (12kV)
6.35/11 (12kV)
8.7/15 (17.5kV)
12/20 (24kV)
Part Numbers:
703937 – K400AR-4BC/J + KBC-RING CLAMP 3 *SS
Technical Characteristics
The manufacturer tests each bushing for AC withstand and partial discharge before it leaves the factory.
The bolted type equipment bushings are moulded epoxy insulated parts and meet the requirements of CENELEC EN 50180.
A non-tracking insulating rubber boot is installed over the bushing shank.
On the new Interface C in-air bushing you can install all separable connectors of the Interface C product family. It also offers the possibility to install a Surge Arrester.
The new Interface C in-air bushing is also available with ATEX/IECEx/UKEx certification.
To order the equipment bushing, specify the type. We can supply the bushings with an earth jumper (/J) or an earth plate (/GS). This earth connection must be specified when ordering (e.g. K400AR-4BC/J):
Euromold Equipment
Bushing Type Voltage
Um Current
Ir Creepage Length
A-B
400AR-4BC 12 kV 1250 Amps 315 mm
Note: For dimensions of the above bushing types, refer to the Technical Data Table below.
For Ordering Instructions and Part Number Selection Table of Nexans Euromold 400AR-4BC/ K400AR-4BC Equipment Bushings, please refer to the Technical Data Table Below. For additional General and Technical Information, download the PDF files.
FREE Technical Advisory Service
E-Tech Components UK Ltd maintains a free technical advisory service.
Contact us for enquiries concerning this and all other products: +44 (0) 1744 762 929
| Euromold Equipment Bushing Type | Voltage Um |
|---|---|
| Euromold Equipment Bushing Type400AR-4BC | Voltage Um12 kV |
| Euromold Equipment Bushing TypeK400AR-4BC | Voltage Um24 kV |
| ORDERING INSTRUCTIONS To order the equipment bushing, specify the type. The bushings are supplied with an earth jumper (/J) or an earth plate (/GS). This earth connection must be specified when ordering (e.g. K400AR-4BC/J). For use in potentially explosive atmospheres (for 12kV max), order -/ATEX | |
| EQUIPMENT BUSHING TYPE | VOLTAGE Um |
| EQUIPMENT BUSHING TYPE400AR-4BC | VOLTAGE Um12 kV |
| EQUIPMENT BUSHING TYPEK400AR-4BC | VOLTAGE Um24 kV |
