Home>Cable Accessories>Separable Connectors>Nexans Euromold Separable Connectors
Nexans Euromold 440PB Separable Coupling Connector is a coupling connector (bolted type) for dual arrangement. Designed to be used with 400TB and 440TB Separable Tee Connector and meets the requirements of CENELEC HD 629,1.
Type 440PB Part Numbers: 440PB/G, K440PB/G, M440PB/G, P440PB/G.
Euromold 440PB is a bolted separable coupling connector specified to terminate and connect medium/high voltage cables in the following voltage classes:
6/10 (12kV)
6.35/11 (12kV)
8.7/15 (17.5kV)
12/20 (24kV)
12.7/22 (24kV)
18/30 (36kV)
19/33 (36kV)
20.8/36 (42kV)
Technical Characteristics
A thick conductive EPDM jacket provides a total safe to touch screen which ensures safety for personnel.
Each separable connector is tested for AC withstand and partial discharge prior to leaving the factory.
The 440PB separable connector meets the requirements of CENELEC HD 629.1 S1.
Euromold
Type 440PB Voltage
Um Current
Ir Conductor Size
Min Conductor Size
Max
440PB/G 12 kV 800 Amps 185 mm2 630 mm2
K440PB/G 24 kV 800 Amps 185 mm2 630 mm2
M440PB/G 36 kV 800 Amps 185 mm2 630 mm2
Interface designed to fit 400TB/ 440TB connector
Contact rod for 440PB
Conductive EPDM insert
Insulating EPDM layer moulded between the insert and the jacket
Conductive EPDM jacket
Conductive EPDM cap
Basic insulating plug
Conductor contact
Cable reducer
Earthing lead
The screen break design enables cable outer sheath testing without removing or dismantling the connector.
The complete (K)(M)(P)440PB/G coupling connector kit comprises 3 x the following components. The kit also comprises silicone grease, field control mastic, installation rod, installation instructions and crimp chart.
For Ordering Instructions and Part Number Selection Table of Nexans Euromold 440PB Separable Coupling Connector (440PB/G, K440PB/G, M440PB/G, P440PB/G), please refer to the Technical Data Table Below. For additional General and Technical Information, download the PDF files.
FREE Technical Advisory Service
E-Tech Components UK Ltd maintains a free technical advisory service.
Contact us for enquiries concerning this and all other products: +44 (0) 1744 762 929
| Euromold Type 440PB | Voltage Um |
|---|---|
| Euromold Type 440PB440PB/G | Voltage Um12 kV |
| Euromold Type 440PBK440PB/G | Voltage Um24 kV |
| Euromold Type 440PBM440PB/G | Voltage Um36 kV |
| Euromold Type 440PBP440PB/G | Voltage Um42 kV |
| ORDERING INSTRUCTIONS FOR (K)(M)(P)440PB To order the coupling connector, select the ordering part number which gives you the best centring of your core insulation diameter and substitute X using table X, according to your conductor size and type. Add a 'K' for use up to 24 kV, add an 'M' for use up to 36 kV and a 'P' for use up to 42 kV. Example: The copper wire screened cable is 36 kV, 240 mm2 stranded copper with a diameter over core insulation of 37 mm. Order 3 x M440PB/G-32-240(K) M-12-2 coupling connector kit. | |
| PART NUMBER | DIAMETER OVER CORE INSULATION MIN |
| PART NUMBER3 x 440PB/G-22-X | DIAMETER OVER CORE INSULATION MIN23.5 mm |
| PART NUMBER3 x 440PB/G-27-X | DIAMETER OVER CORE INSULATION MIN28.5 mm |
| PART NUMBER3 x 440PB/G-32-X | DIAMETER OVER CORE INSULATION MIN34 mm |
| PART NUMBER3 x 440PB/G-37-X | DIAMETER OVER CORE INSULATION MIN39 mm |
| PART NUMBER3 x 440PB/G-43-X | DIAMETER OVER CORE INSULATION MIN45.5 mm |
| TABLE X - CONNECTORS SUITABLE FOR COPPER & ALUMINIUM CABLES | |
| CONDUCTOR SIZE | ALU CONDUCTOR DIN HEX |
| CONDUCTOR SIZE185 mm2 | ALU CONDUCTOR DIN HEX185(K)M-12-2 |
| CONDUCTOR SIZE240 mm2 | ALU CONDUCTOR DIN HEX240(K)M-12-2 |
| CONDUCTOR SIZE300 mm2 | ALU CONDUCTOR DIN HEX300(K)M-12-2 |
| CONDUCTOR SIZE400 mm2 | ALU CONDUCTOR DIN HEX400(K)M-12-2 |
| CONDUCTOR SIZE500 mm2 | ALU CONDUCTOR DIN HEX500(K)M-12-2 |
| CONDUCTOR SIZE630 mm2 | ALU CONDUCTOR DIN HEX- |
