Home>Cable Accessories>Separable Connectors>Nexans Euromold Separable Connectors
Nexans Euromold 900AR-4 Equipment Bushings are MV-HV Bushings for use in equipment insulated with oil fluid, typically for transformers, switchgear, capacitors that are specified to terminate and connect medium/high voltage cables in the following voltage classes:
6/10 (12kV)
6.35/11 (12kV)
8.7/15 (17.5kV)
12/20 (24kV)
12.7/22 (24kV)
18/30 (36kV)
19/22 (36kV)
20.8/36 (42kV)
Technical Characteristics
Each bushing is tested for AC withstand and partial discharge prior to leaving the factory.
The bolted type equipment bushings are moulded epoxy insulated parts and meet the requirements of CENELEC EN 50180 and IEC 60137.
To order the equipment bushing, specify the type. We can supply the bushings with an earth jumper (/J) or an earth plate (/GS). This earth connection must be specified when ordering (e.g. 900AR-1/GS):
Euromold Equipment
Bushing Type Interface Type Voltage
Um Current
Ir
For Ordering Instructions and Part Number Selection Table of Nexans Euromold 900AR-4 Equipment Bushings, please refer to the Technical Data Table Below. For additional General and Technical Information, download the PDF files.
FREE Technical Advisory Service
E-Tech Components UK Ltd maintains a free technical advisory service.
Contact us for enquiries concerning this and all other products: +44 (0) 1744 762 929
| Euromold Equipment Bushing Type | Interface Type |
|---|---|
| Euromold Equipment Bushing Type900AR-4 | Interface TypeF1 |
| ORDERING INSTRUCTIONS To order the equipment bushing, specify the type. The bushings can be supplied with an earth jumper (/J) or an earth plate (/GS). This earth connection must be specified when ordering (e.g. 900AR-4/GS). | |
| EQUIPMENT BUSHING TYPE | Interface Type |
| EQUIPMENT BUSHING TYPE900AR-4 | Interface Type F1 |
