Home>Cable Accessories>Separable Connectors>Nexans Euromold Separable Connectors
Nexans Euromold T-HSBK Three Core Heat-Shrink Breakout Kit used for sealing 3-core polymeric insulated cable crutches and earthing of the metallic screens and armour. Suitable for use with Euromold separable connectors with ground lead (/G) or with terminations.
The installed breakout fulfils the requirements of IP54. The armouring and screen connection systems have short circuit rating (Isc) of up to 5,1 kA for 1s.
T-HSBK Kit consists of (depending on cable type): a heat-shrinkable breakout, 3 sleeves of 500 mm, earth braid and roll springs, hose clamp, water sealing mastic and installation instructions.
For additional General and Technical Information, download the PDF files.
FREE Technical Advisory Service
E-Tech Components UK Ltd maintains a free technical advisory service.
Contact us for enquiries concerning this and all other products: +44 (0) 1744 762 929
| ORDERING INSTRUCTIONS FOR T-HSBK To order the 3-core kit, select the part number, which gives you the best centering over the cable core insulation diameter and substitute X using table X, according to your cable type. | |
|---|---|
| PART NUMBER | TYPICAL USE CONDUCTOR SIZES 12, 17 & 24 kV |
| PART NUMBERT-HSBK-20-XY | TYPICAL USE CONDUCTOR SIZES 12, 17 & 24 kV16-95 mm2 |
| PART NUMBERT-HSBK-30-XY | TYPICAL USE CONDUCTOR SIZES 12, 17 & 24 kV95-240 mm2 |
| PART NUMBERT-HSBK-40-XY | TYPICAL USE CONDUCTOR SIZES 12, 17 & 24 kV185-400 mm2 |
| PART NUMBERT-HSBK-50-XY | TYPICAL USE CONDUCTOR SIZES 12, 17 & 24 kV- |
| PART NUMBERT-HSBK-60-XY | TYPICAL USE CONDUCTOR SIZES 12, 17 & 24 kV- |
| TABLE X | |
| SCREEN TYPE "X" | X |
| SCREEN TYPE "X"Individual Copper Tape Screen | XDR1 |
| SCREEN TYPE "X"Individual Copper Wire Screen | XDR2 |
| SCREEN TYPE "X"Common Copper Wire Screen | XDR3 |
