Home>Cable Accessories>Separable Connectors>Nexans Euromold Separable Connectors
Nexans Euromold 784TB Separable Tee Connector
Nexans Euromold 784TB Separable Tee Connector (Cu) is a tee-connector (bolted type) used to terminate MV-HV XLPE/EPR (polymeric) insulated cables up to 42kV to medium/high voltage electrical equipment (transformers, switchgear, motors, etc.). Meets the requirements of CENELEC HD 629,1. Also used to connect cable to cable when using the appropriate mating parts.
Type 784TB Part Numbers: 784TB/G, K784TB/G, M784TB/G, P784TB/G.
Euromold 784TB is a bolted separable tee connector specified to terminate and connect medium/high voltage cables in the following voltage classes:
6/10 (12kV)
6.35/11 (12kV)
8.7/15 (17.5kV)
12/20 (24kV)
12.7/22 (24kV)
18/30 (36kV)
19/33 (36kV)
20.8/36 (42kV)
Technical Characteristics
A thick conductive EPDM jacket provides a total safe to touch screen which ensures safety for personnel.
Each separable connector is tested for AC withstand and partial discharge prior to leaving the factory.
The 784TB separable connector meets the requirements of CENELEC HD 629,1.
Euromold
Type 784TB Voltage
Um Current
Ir Conductor Size
Min-Max
784TB/G 12 kV 1250 Amps 50-630 mm2
K784TB/G 24 kV 1250 Amps 35-630 mm2
M784TB/G 36 kV 1250 Amps 35-630 mm2
Conductive EPDM insert
Conductive EPDM jacket
Insulating EPDM layer moulded between the insert and the jacket
Type E 5/8″ interface as described by IEEE 386.
Conductor contact
Basic insulating plug 858 BIPA (with VD point)
Cable reducer
Conductive rubber cap
Stud & flange nut 5/8″
The screen break design enables cable outer sheath testing without removing or dismantling the connector.
The complete (K)(M)(P)784TB/G tee connector kit comprises 3 x the following components. The kit also comprises silicone grease, field control mastic, gloves, wipers, roll adhesive tape, installation instructions, venting rod and crimp chart.
For Ordering Instructions and Part Number Selection Table of Nexans Euromold 784TB Separable Tee Connector (Cu) (784TB/G, K784TB/G, M784TB/G, P784TB/G), please refer to the Technical Data Table Below. For additional General and Technical Information, download the PDF files.
FREE Technical Advisory Service
E-Tech Components UK Ltd maintains a free technical advisory service.
Contact us for enquiries concerning this and all other products: +44 (0) 1744 762 929
| Euromold Type 784TB | Voltage Um |
|---|---|
| Euromold Type 784TB784TB/G | Voltage Um12 kV |
| Euromold Type 784TBK784TB/G | Voltage Um24 kV |
| Euromold Type 784TBM784TB/G | Voltage Um36 kV |
| Euromold Type 784TBP784TB/G | Voltage Um42 kV |
| ORDERING INSTRUCTIONS FOR (K)(M)(P)784TB - CU To order the tee connector, select the ordering part number which gives you the best centring of your core insulation diameter and substitute X using table X, according to your conductor size and type. Add a 'K' for use up to 24 kV, add an 'M' for use up to 36 kV and a 'P' for use up to 42 kV. Example: The copper wire screened cable is 36 kV, 240 mm2 stranded aluminium with a diameter over core insulation of 37 mm. Order 3 x M784TB/G-S-32-240BI2 tee connector kit. | |
| PART NUMBER | DIAMETER OVER CORE INSULATION MIN |
| PART NUMBER3 x 784TB/G-S-15-X | DIAMETER OVER CORE INSULATION MIN16 mm |
| PART NUMBER3 x 784TB/G-S-19-X | DIAMETER OVER CORE INSULATION MIN20 mm |
| PART NUMBER3 x 784TB/G-S-22-X | DIAMETER OVER CORE INSULATION MIN23.5 mm |
| PART NUMBER3 x 784TB/G-S-27-X | DIAMETER OVER CORE INSULATION MIN28.5 mm |
| PART NUMBER3 x 784TB/G-S-32-X | DIAMETER OVER CORE INSULATION MIN34 mm |
| PART NUMBER3 x 784TB/G-S-37-X | DIAMETER OVER CORE INSULATION MIN39 mm |
| PART NUMBER3 x 784TB/G-S-43-X | DIAMETER OVER CORE INSULATION MIN45.5 mm |
| TABLE X - ALUMINIUM & COPPER CONDUCTOR | |
| CONDUCTOR SIZE | Alu Conductor DIN Hexagonal |
| CONDUCTOR SIZE35 mm2 | Alu Conductor DIN Hexagonal35BI2 |
| CONDUCTOR SIZE50 mm2 | Alu Conductor DIN Hexagonal50BI2 |
| CONDUCTOR SIZE70 mm2 | Alu Conductor DIN Hexagonal70BI2 |
| CONDUCTOR SIZE95 mm2 | Alu Conductor DIN Hexagonal95BI2 |
| CONDUCTOR SIZE120 mm2 | Alu Conductor DIN Hexagonal120BI2 |
| CONDUCTOR SIZE150 mm2 | Alu Conductor DIN Hexagonal150BI2 |
| CONDUCTOR SIZE185 mm2 | Alu Conductor DIN Hexagonal185BI2 |
| CONDUCTOR SIZE240 mm2 | Alu Conductor DIN Hexagonal240BI2 |
| CONDUCTOR SIZE300 mm2 | Alu Conductor DIN Hexagonal300BI2 |
| CONDUCTOR SIZE400 mm2 | Alu Conductor DIN Hexagonal400BI2 |
| CONDUCTOR SIZE500 mm2 | Alu Conductor DIN Hexagonal500BI2 |
| CONDUCTOR SIZE630 mm2 | Alu Conductor DIN Hexagonal- |
