Nexans Euromold 400AR-2 Equipment Bushing

Product overview

Nexans Euromold 400AR-2 Equipment Bushing

Nexans Euromold 400AR-2/ K400AR-2/ M400AR-2 Equipment Bushings are MV-HV Bushings for use in equipment insulated with oil fluid, typically for transformers, switchgear, capacitors that are specified to terminate and connect medium/high voltage cables in the following voltage classes:

6/10 (12kV)

6.35/11 (12kV)

8.7/15 (17.5kV)

12/20 (24kV)

12.7/22 (24kV)

18/30 (36kV)

Technical Characteristics

Each bushing is tested for AC withstand and partial discharge prior to leaving the factory.

The plug-in type equipment bushings are moulded epoxy insulated parts and meet the requirements of IEC 60137. The (K)(M)400T1 also meets CENELEC EN 50180.

Specification & Design

To order the equipment bushing, specify the type. The bushings can be supplied with an earth jumper (/J) or an earth plate (/GS). This earth connection must be specified when ordering (e.g. K400AR-2/J):

Euromold Equipment

Bushing Type Voltage

Um Current

Ir

400AR-2 12 kV 400 Amps

K400AR-2 24 kV 400 Amps

M400AR-2 36 kV 400 Amps

Note: For dimensions of the above bushing types, refer to the Technical Data Table below.

Nexans Euromold 400AR-2 Fixings for Bushings

For Ordering Instructions and Part Number Selection Table of Nexans Euromold 400AR-2/ K400AR-2/ M400AR-2 Equipment Bushings, please refer to the Technical Data Table Below. For additional General and Technical Information, download the PDF files.

FREE Technical Advisory Service

E-Tech Components UK Ltd maintains a free technical advisory service.

Contact us for enquiries concerning this and all other products: +44 (0) 1744 762 929