Home>Cable Accessories>Separable Connectors>Nexans Euromold Separable Connectors
Nexans Euromold 909PB Separable Coupling Connector is a coupling connector (bolted type) for dual arrangement. Designed to be used with 909TB Separable Tee Connectors and meets the requirements of CENELEC HD 629,1.
Type 909PB Part Numbers: 909PB/G, K909PB/G, M909PB/G, P909PB/G.
Euromold 909PB is a bolted separable coupling connector specified to terminate and connect medium/high voltage cables in the following voltage classes:
6/10 (12kV)
6.35/11 (12kV)
8.7/15 (17.5kV)
12/20 (24kV)
12.7/22 (24kV)
18/30 (36kV)
19/33 (36kV)
20.8/36 (42kV)
Technical Characteristics
The thick conductive EPDM jacket provides a total safe to touch screen which ensures safety for personnel.
Each separable connector is tested for AC withstand and partial discharge prior to leaving the factory.
The 909PB separable connector meets the requirements of CENELEC HD 629,1.
Euromold
Type 909PB Voltage
Um Current
Ir Conductor Size
Min-Max
909PB/G 12 kV 630-1250-2500 Amps 500-1200 mm2
K909PB/G 24 kV 630-1250-2500 Amps 400-1200 mm2
M909PB/G 36 kV 630-1250-2500 Amps 240-1200 mm2
Conductive EPDM insert
Conductive EPDM jacket
Insulating EPDM layer moulded between the insert and the jacket
Interface to fit 909TB
Conductor contact
Basic insulating plug
Cable reducer
Conductive rubber cap
Stud + nut + washer
The screen break design enables cable outer sheath testing without removing or dismantling the connector.
The complete (K)(M)(P)909PB/G connector kit comprises the following components. The kit also comprises silicone grease, field control mastic, gloves, roll adhesive tape, installation instructions and crimp chart.
For Ordering Instructions and Part Number Selection Table of Nexans Euromold 909PB Separable Coupling Connector (909PB/G, K909PB/G, M909PB/G, P909PB/G), please refer to the Technical Data Table Below. For additional General and Technical Information, download the PDF files.
FREE Technical Advisory Service
E-Tech Components UK Ltd maintains a free technical advisory service.
Contact us for enquiries concerning this and all other products: +44 (0) 1744 762 929
| Euromold Type 909PB | Voltage Um |
|---|---|
| Euromold Type 909PB909PB/G | Voltage Um12 kV |
| Euromold Type 909PBK909PB/G | Voltage Um24 kV |
| Euromold Type 909PBM909PB/G | Voltage Um36 kV |
| Euromold Type 909PBP909PB/G | Voltage Um42 kV |
| ORDERING INSTRUCTIONS FOR (K)(M)(P)909PB To order the coupling connector, select the ordering part number which gives you the best centring of your core insulation diameter and substitute X using table X, according to your conductor size and type. Add a 'K' for use up to 24 kV, add an 'M' for use up to 36 kV and a 'P' for use up to 42 kV. Example: The cable is 36 kV, 1000 mm2 stranded aluminium with a diameter over core insulation of 52 mm. Order M909PB/G-S-43-1000AL1 connector kit. | |
| PART NUMBER | DIAMETER OVER CORE INSULATION MIN |
| PART NUMBER909PB/G-S-32-X | DIAMETER OVER CORE INSULATION MIN35 mm |
| PART NUMBER909PB/G-S-37-X | DIAMETER OVER CORE INSULATION MIN40 mm |
| PART NUMBER909PB/G-S-43-X | DIAMETER OVER CORE INSULATION MIN46 mm |
| PART NUMBER909PB/G-S-50-X | DIAMETER OVER CORE INSULATION MIN53 mm |
| PART NUMBER909PB/G-S-53-X | DIAMETER OVER CORE INSULATION MIN56 mm |
| PART NUMBER909PB/G-S-56-X | DIAMETER OVER CORE INSULATION MIN59 mm |
| PART NUMBER909PB/G-S-59-X | DIAMETER OVER CORE INSULATION MIN62 mm |
| TABLE X - ALUMINIUM & COPPER CONDUCTOR | |
| CONDUCTOR SIZE | Alu Conductor DIN Hexagonal |
| CONDUCTOR SIZE240 mm2 | Alu Conductor DIN Hexagonal240BI2 |
| CONDUCTOR SIZE300 mm2 | Alu Conductor DIN Hexagonal300BI2 |
| CONDUCTOR SIZE400 mm2 | Alu Conductor DIN Hexagonal400BI2 |
| CONDUCTOR SIZE500 mm2 | Alu Conductor DIN Hexagonal500BI2 |
| CONDUCTOR SIZE630 mm2 | Alu Conductor DIN Hexagonal630BI2 |
| CONDUCTOR SIZE800 mm2 | Alu Conductor DIN Hexagonal- |
| CONDUCTOR SIZE1000 mm2 | Alu Conductor DIN Hexagonal- |
| CONDUCTOR SIZE1200 mm2 | Alu Conductor DIN Hexagonal- |
