Cable Accessories
Nexans Euromold 400TR Test Rod can be used for cable fault location, cable testing, phase check, etc. You can make connections using a cable lug, a 4 mm plug or spring clips. The 400TR test rod works with 400TE, 400TB and 440TB connectors.
Test Rod
Type Max AC
Test Voltage
(50Hz – 1min) Max DC
Test Voltage
(8xU0 – 30min) Impulse Voltage
(1.2 x 50 μs) min
Insulating Shroud
Threaded rod for test connection
Two M12 nuts
Insulation
Copper test rod stem
An insulating shroud is provided to allow the application of test voltages when bushings are closely spaced.
You mount the test rod onto the clamping screw in the type C interface tee and coupling connectors. Then, connect the test cable to the threaded stem and move the insulating shroud to its final position over the end of the test rod.
For additional General and Technical Information, download the PDF files.
MGA Trading, Dammam, maintains a technical advisory service.
Contact us: +966 13 882 1111 / +966 13 831 1116
| Test Rod Type | Max AC Test Voltage (50Hz – 1min) |
|---|---|
| Test Rod Type400TR | Max AC Test Voltage (50Hz – 1min)36 kV |
| Test Rod Type | Max AC Test Voltage (50Hz - 1min) |
| Test Rod Type400TR | Max AC Test Voltage (50Hz - 1min)36 kV |