Cable Accessories
Nexans Euromold 670AR-2/ K670AR-2 Equipment Bushings are MV-HV Bushings for use in equipment insulated with oil fluid, typically for transformers, switchgear, capacitors that are specified to terminate and connect medium/high voltage cables in the following voltage classes:
6/10 (12kV)
6.35/11 (12kV)
8.7/15 (17.5kV)
12/20 (24kV)
12.7/22 (24kV)
Technical Characteristics
Each bushing is tested for AC withstand and partial discharge prior to leaving the factory.
The plug-in type equipment bushings are moulded epoxy insulated parts and meet the requirements of CENELEC EN 50180 and IEC 60137.
To order the equipment bushing, specify the type. We can supply the bushings with an earth jumper (/J) or an earth plate (/GS). This earth connection must be specified when ordering (e.g. K670AR-2/GS):
Euromold Equipment
Bushing Type Voltage
Um Current
Ir
670AR-2 12 kV 1250 Amps
Note: For dimensions of the above bushing types, refer to the Technical Data Table below.
For additional General and Technical Information on Nexans Euromold K670AR-2 Equipment Bushings, download the PDF files or check the Design Image above.
MGA Trading, Dammam, maintains a technical advisory service.
Contact us: +966 13 882 1111 / +966 13 831 1116
| Euromold Equipment Bushing Type | Voltage Um |
|---|---|
| Euromold Equipment Bushing Type670AR-2 | Voltage Um12 kV |
| Euromold Equipment Bushing TypeK670AR-2 | Voltage Um24 kV |