Nexans Euromold 180AR-3 Equipment Bushing

Product overview

Nexans Euromold 180AR-3 Equipment Bushing

Nexans Euromold 180AR-3 & K180AR-3 Equipment Bushings are MV-HV Bushings for use in equipment insulated with oil fluid, typically for transformers, switchgear, capacitors that are specified to terminate and connect medium/high voltage cables in the following voltage classes:

6/10 (12kV)

6.35/11 (12kV)

8.7/15 (17.5kV)

12/20 (24kV)

12.7/22 (24kV)

Technical Characteristics

Each bushing is tested for AC withstand and partial discharge prior to leaving the factory.

The plug-in type equipment bushings are moulded epoxy insulated parts and meet the requirements of CENELEC EN 50180.

Specification & Design

To order the equipment bushing, specify the type. We can supply the bushings with an earth jumper (/J) or an earth plate (/GS). This earth connection must be specified when ordering (e.g. K180AR-3/J). The bushings come equipped with 6 tabs for the bail restraint. The (K)180AR-3-G with 4 tabs and 2 threaded inserts M6 (-G version).

Euromold Equipment

Bushing Type Voltage

Um Current

Ir

180AR-3 12 kV 250 Amps

K180AR-3 24 kV 250 Amps

Nexans Euromold 180AR-X Fixings for Bushings

For Ordering Instructions and Part Number Selection Table of Nexans Euromold Equipment Bushings (180AR-3 , K180AR-3), please refer to the Technical Data Table Below. For additional General and Technical Information, download the PDF files.

FREE Technical Advisory Service

E-Tech Components UK Ltd maintains a free technical advisory service.

Contact us for enquiries concerning this and all other products: +44 (0) 1744 762 929