Nexans Euromold 400SFR-P Equipment Bushing

Product overview

Nexans Euromold 400SFR-P Equipment Bushing

Nexans-Euromold 400SFR-P/ K400SFR-P Equipment Bushings are MV-HV Bushings for use in equipment insulated with SF6 gas and specified to terminate and connect Medium/High voltage cables in the following voltage classes:

6/10 (12kV)

6.35/11 (12kV)

8.7/15 (17.5kV)

12/20 (24kV)

12.7/22 (24kV)

Nexans K400SFR-P – Technical Characteristics

Each bushing is tested for AC withstand and partial discharge prior to leaving the factory.

The plug-in type equipment bushing 400SFR-P meets the requirements of CENELEC EN 50180 and IEC 60137.

Nexans Euromold 400SFR-P Specification & Design

The equipment bushing is a moulded epoxy insulated part with a connector interface in accordance with CENELEC EN 50181. Also, the 400SFR-P bushing has a shank outside this standard, adapted for use in SF6 gas.

Finally, to order the equipment bushing for medium/high voltage gas insulated switchgear, simply specify the type.

Euromold Equipment

Bushing Type Voltage

Um Current

Ir

400SFR-P 12 kV 400 Amps

K400SFR-P 24 kV 400 Amps

Fixings for Bushings

For Ordering Instructions and Part Number Selection Table, please refer to the Technical Data Table Below. For additional General and Technical Information, download the PDF files.

FREE Technical Advisory Service

E-Tech Components UK Ltd maintains a free technical advisory service.

Contact us for enquiries concerning this and all other products: +44 (0) 1744 762 929