Home>Cable Accessories>Separable Connectors>Nexans Euromold Separable Connectors
Nexans Euromold 400LR Separable Elbow Connector with 400A Current Rating is an elbow connector designed for Interface B and covers voltages from 11/12kV to 33/36kV with a maximum conductor size of 240sqmm. The separable connector connects polymeric insulated cable to equipment (transformers, switchgear, motors, etc.) and meets the requirements of CENELEC HD 629,1.
Type 400LR Part Numbers: 400LR/G, K400LR/G, M400LR/G.
Euromold 400LR is a screened separable elbow connector specified to terminate and connect medium/high voltage cables onto Interface B bushings in the following voltage classes:
6/10 (12kV)
6.35/11 (12kV)
8.7/15 (17.5kV)
12/20 (24kV)
12.7/22 (24kV)
18/30 (36kV)
19/33 (36kV)
Technical Characteristics
The thick conductive EPDM jacket provides a total safe to touch screen which ensures safety for personnel.
Each separable connector is tested for AC withstand and partial discharge prior to leaving the factory.
Specification & Design
Euromold
Type 400LR Voltage
Um Current
Ir Conductor Size
Min Conductor Size
Max
400LR/G 12 kV 400 Amps 50 240
K400LR/G 24 kV 400 Amps 25 240
Conductive EPDM insert.
Conductive EPDM jacket.
Insulating EPDM layer moulded between the insert and the jacket.
Type B – interface as described by CENELEC EN 50180 and 50181.
Conductor connector.
Cable reducer.
Earthing lead.
VD point.
Conductive rubber cap.
The screen break design enables cable outer sheath testing without removing or dismantling the connector.
The complete (K)(M)400LR/G elbow connector kit comprises the following components. The kit also comprises silicon grease, gloves, wipers and installation instructions.
For Ordering Instructions and Part Number Selection Table of Nexans Euromold 400LR Elbow Connectors (400LR/G, K400LR/G, M400LR/G), please refer to the Technical Data Table Below. For additional General and Technical Information, download the PDF files.
FREE Technical Advisory Service
E-Tech Components UK Ltd maintains a free technical advisory service.
Contact us for enquiries concerning this and all other products: +44 (0) 1744 762 929
| Euromold Type 400LR | Voltage Um |
|---|---|
| Euromold Type 400LR400LR/G | Voltage Um12 kV |
| Euromold Type 400LRK400LR/G | Voltage Um24 kV |
| Euromold Type 400LRM400LR/G | Voltage Um36 kV |
| ORDERING INSTRUCTIONS FOR (K)(M)400LR/G To order the elbow connector, select the part number which gives the best centring to the cable core insulation diameter and substitute X using table X, according to the conductor size and type. Add a 'K' for use up to 24 kV and add an 'M' for use up to 36 kV. Example: The copper wire screened cable is 24 kV, 185 mm2 stranded copper with a diameter over core insulation of 27.5 mm. Order a K400LR/G-018-95.240UN5 elbow connector kit. | |
| PART NUMBER | DIAMETER OVER CORE INSULATION MIN |
| PART NUMBER400LR/G-011-X | DIAMETER OVER CORE INSULATION MIN12 mm |
| PART NUMBER400LR/G-015-X | DIAMETER OVER CORE INSULATION MIN16 mm |
| PART NUMBER400LR/G-018-X | DIAMETER OVER CORE INSULATION MIN19 mm |
| PART NUMBER400LR/G-021-X | DIAMETER OVER CORE INSULATION MIN22 mm |
| PART NUMBER400LR/G-027-X | DIAMETER OVER CORE INSULATION MIN28.5 mm |
| TABLE X - ALUMINIUM & COPPER CONDUCTOR | |
| CONDUCTOR SIZE | BOLTED |
| CONDUCTOR SIZE25 mm2 | BOLTED25.95UN5 |
| CONDUCTOR SIZE35 mm2 | BOLTED25.95UN5 |
| CONDUCTOR SIZE50 mm2 | BOLTED25.95UN5 |
| CONDUCTOR SIZE70 mm2 | BOLTED25.95UN5 |
| CONDUCTOR SIZE95 mm2 | BOLTED25.95UN5 |
| CONDUCTOR SIZE120 mm2 | BOLTED- |
| CONDUCTOR SIZE150 mm2 | BOLTED- |
| CONDUCTOR SIZE185 mm2 | BOLTED- |
| CONDUCTOR SIZE240 mm2 | BOLTED- |
