Nexans Euromold 400AR-4 Equipment Bushing

Product overview

Nexans Euromold 400AR-4 Equipment Bushing

Nexans Euromold 400AR-4/ K400AR-4 / M400AR-4 Equipment Bushings are MV-HV Bushings for use in equipment insulated with oil fluid, typically for switchgear, capacitors, motors that are specified to terminate and connect medium/high voltage cables in the following voltage classes:

6/10 (12kV)

6.35/11 (12kV)

8.7/15 (17.5kV)

12/20 (24kV)

12.7/22 (24kV)

18/30 (36kV)

19/33 (36kV)

Technical Characteristics

Each bushing is tested for AC withstand and partial discharge prior to leaving the factory.

The bolted type equipment bushings are moulded epoxy insulated parts and meet the requirements of CENELEC EN 50180 and IEC 60137.

Specification & Design

To order the equipment bushing, specify the type. The bushings can be supplied with an earth jumper (/J) or an earth plate (/GS). This earth connection must be specified when ordering (e.g. M400AR-4/J):

Euromold Equipment

Bushing Type Voltage

Um Current

Ir Creepage Length

A-B

400AR-4 12 kV 1250 Amps 315 mm

K400AR-4 24 kV 1250 Amps 315 mm

M400AR-4 36 kV 1250 Amps 315 mm

Note: For dimensions of the above bushing types, refer to the Technical Data Table below.

Nexans Euromold 400AR-4 Fixings for Bushings

For Ordering Instructions and Part Number Selection Table of Nexans Euromold 400AR-4/ K400AR-4 /M400AR-4 Equipment Bushings, please refer to the Technical Data Table Below. For additional General and Technical Information, download the PDF files.

FREE Technical Advisory Service

E-Tech Components UK Ltd maintains a free technical advisory service.

Contact us for enquiries concerning this and all other products: +44 (0) 1744 762 929